ENV2102 Applied Hydrology

ENV	2102	90340	2, 2009	EXT	Applied Hydrology	1.00	Toowoomba
Subject	Cat-nbr	Class	Term	Mode	Description	Units	Campus

Academic group:	FOENS
Academic org:	FOES03
Student contribution band:	6
ASCED code:	010711

Staffing
Other requisites
Synopsis
Objectives
Topics
Texts
Reference materials
Student workload
Assessment details
Important assessment information
Assessment notes
Production date
PDF version

STAFFING

Examiner: Ian Brodie
Moderator: Rod Smith

OTHER REQUISITES

Recommended prior or concurrent study: ENV1101

SYNOPSIS

This course provides an introduction to engineering hydrology in the Associate Degree and Bachelor of Engineering Technology programs. It seeks to provide the basic skills required to carry out hydrologic analyses and designs in accordance with current Australian practice as outlined in "Australian Rainfall and Runoff - A Guide to Flood Estimation". The topics covered include flood estimation, catchment yield, stormwater drainage, routing in channels and storages, reservoir design and groundwater hydrology, to enable the student to carry out basic hydrologic designs of dam spillways, bridges and culverts, urban drainage schemes, detention basins and flood mitigation dams, reservoir capacity and to estimate yield from groundwater systems.

OBJECTIVES

The course objectives define the student learning outcomes for a course. The assessment item(s) that may be used to assess student achievement of an objective are shown in parenthesis. On completion of this course, students should be able to:

1.: explain the hydrologic cycle; (2 Hour Restricted Examination)
2.: estimate areal rainfall from point rainfall; (2 Hour Restricted Examination)
3.: derive IFD design rainfalls for any location within Australia; (Assignment 1; 2 Hour Restricted Examination)
4.: estimate flood magnitude using flood frequency analysis and the Rational method; (Assignment 1; 2 Hour Restricted Examination)
5.: design urban stormwater drainage systems; (Assignment 2; 2 Hour Restricted Examination)
6.: use simple computer models to estimate long term catchment yield; (Assignment 3; 2 Hour Restricted Examination)
7.: estimate hydrograph lag and attenuation effects in rivers and through storages; (2 Hour Restricted Examination)
8.: design the storage capacity of water supply reservoirs using critical period methods; (Assignment 3; 2 Hour Restricted Examination)
9.: estimate the yield characteristics of groundwater aquifers (2 Hour Restricted Examination)

TOPICS

	Description	Weighting (%)
1.	Hydrologic Cycle	8.00
2.	Rainfall and Streamflow Measurement	8.00
3.	Flood Estimation	20.00
4.	IFD Rainfalls	12.00
5.	Urban Stormwater Drainage	14.00
6.	Catchment Yield Analysis	8.00
7.	Storage Design	10.00
8.	Channel and Reservoir Routing	10.00
9.	Groundwater	10.00

TEXT and MATERIALS required to be PURCHASED or accessed

ALL textbooks and materials are available for purchase from USQ BOOKSHOP (unless otherwise stated). Orders may be placed via secure internet, free fax 1800642453, phone 07 46312742 (within Australia), or mail. Overseas students should fax +61 7 46311743, or phone +61 7 46312742. For costs, further details, and internet ordering, use the 'Textbook Search' facility at http://bookshop.usq.edu.au click 'Semester', then enter your 'Course Code' (no spaces).

Any hand held battery operated calculator.

Students must have access to a personal computer and spreadsheet software.

REFERENCE MATERIALS

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.

Chow, V T, Maidment, D R & Mays, L W 1988, Applied Hydrology, McGraw Hill.

Linsey, R, Kohler, M & Paulhus, J 1975, Hydrology for Engineers, McGraw Hill.

Maidment, D R (ed) 1993, Handbook of Hydrology, McGraw Hill.

McMahon, T A & Mein, R G 1978, Reservoir Capacity and Yield, Elsevier.

Pilgrim, D H (ed) 2001, Australian Rainfall and Runoff - A Guide to Flood Estimation, IEAust, vol 1.

STUDENT WORKLOAD REQUIREMENTS

ACTIVITY	HOURS
Assessments	15.00
Directed Study	53.00
Examinations	2.00
Private Study	85.00

ASSESSMENT DETAILS

Description	Marks out of	Wtg(%)	Due date	Notes
ASSIGNMENT 1	100.00	10.00	21 Aug 2009
ASSIGNMENT 2	200.00	20.00	02 Oct 2009
ASSIGNMENT 3	100.00	10.00	23 Oct 2009
2 HOUR RESTRICTED EXAM	600.00	60.00	END S2	(see note 1)

NOTES

1.: Student Administration will advise students of the dates of their examinations during the semester.

IMPORTANT ASSESSMENT INFORMATION

Attendance requirements:
There are no attendance requirements for this course. However, it is the students' responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)
Penalties for late submission of required work:
If students submit assignments after the due date without extenuating circumstances then a penalty of 5% of the assigned mark may apply for each working day late up to a maximum of ten working days at which time a mark of zero can be recorded for that assignment.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
Examination information:
In a Restricted Examination, candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination).
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.
University Regulations:
Students should read USQ Regulations 5.1 Definitions, 5.6. Assessment, and 5.10 Academic Misconduct for further information and to avoid actions which might contravene University Regulations. These regulations can be found at the URL http://www.usq.edu.au/corporateservices/calendar/part5.htm or in the current USQ Handbook.

ASSESSMENT NOTES

1.	The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
2.	Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
3.	In accordance with University's Assignment Extension Policy (Regulation 5.6.1), the examiner of a course may grant an extension of the due date of an assignment in extenuating circumstances.
4.	The Faculty will normally only accept assessments that have been written, typed or printed on paper-based media.
5.	The Faculty will NOT accept submission of assignments by facsimile.
6.	Students who do not have regular access to postal services or who are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements.
7.	In the event that a due date for an assignment falls on a local public holiday in their area, such as a Show holiday, the due date for the assignment will be the next day. Students are to note on the assignment cover the date of the public holiday for the Examiner's convenience.
8.	Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
9.	Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
10.	Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.

This version produced 11 Dec 2009.