CIV2701 Road Design and Location
|Semester 1, 2012 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Agricultural, Civil, Environmental Engineering|
|Version produced :||30 December 2013|
Examiner: Trevor Drysdale
Moderator: Ron Ayers
Pre-requisite: MAT1500 or ENG1500 or Students must be enrolled in one of the following Programs: GCST or GDGS
The design and construction of roads impacts on almost all sectors of society. The design of a safe and efficient road network requires an understanding of the planning systems, environmental issues, driver characteristics, traffic profiles and many other factors. The course introduces students to the concept of road location with particular emphasis on the design of the geometric elements of the road including horizontal and vertical alignments. The design will be examined from the context of rural road design, however some application to urban roads will be examined. Theory will be supported by the use of computer aided design and modelling packages.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- recognise the importance of the planning process in the design of roads;
- apply basic design parameters and relevant geometric principles to the preliminary design of urban and rural roads;
- explain and apply process of horizontal and vertical road alignment for rural and urban road design;
- differentiate the different design parameters as applied to urban vs rural roads;
- integration of design elements incorporating standard road alignment calculations
|1.||History of road design and planning||10.00|
|2.||Elements of road design||10.00|
|3.||Theory of geometric design elements||30.00|
|4.||Horizontal and vertical alignment||30.00|
|5.||Considerations for urban road design||15.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=01&subject1=CIV2701)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
AustRoads 2009, Guide to road design part 3: geometric design, publication no. AGRD03-10 edn, AustRoads.
Austroads 2009, Guide to road design part 4A: unsignalised and signalised intersections, publication no. AGRD04-09 edn, Austroads.
A hand held battery operated calculator.
Any of the Introduction to Engineering Surveying textbooks.
Road Planning and Design Manual, Department of Main Roads, Queensland - see www.mainroads.qld.gov.au and the search for the manual.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|CMA1||100||10||15 Apr 2012||(see note 1)|
|CMA2||200||20||27 May 2012|
|2 HOUR RESTRICTED EXAMINATION||700||70||End S1||(see note 2)|
- CMA1 and CMA2 will be open for 5 days each, closing on the due date at midnight. Due to the nature of the CMA assessments, no extension of submission date is offered, the assessments being required to be finished within the specified 5 day period. Submission times are Australian Eastern Standard Time as displayed on the clock on the course home page.
- Student Administration will advise students of the dates of their examinations during the semester.
Important assessment information
There are no attendance requirements for this course. However, it is the students' responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
In a Restricted Examination, candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing