ENG2909 Work Experience - Associate
|Semester 2, 2012 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Faculty of Engineering & Surveying|
|Version produced :||23 May 2013|
Examiner: Trevor Drysdale
Moderator: Mark Phythian
Students will normally be completing the last year of their Associate Degree program.
Students must complete a minimum of 30 days of professional practice in their discipline field to be eligible to graduate from the Associate Degree of Engineering program. This work experience course is intended to enable students to document practical engineering and professional practice skills they acquire within the workplace. Work experience may be achieved in numerous ways ranging from roles as junior members of teams to tasks that form part of discrete engineering projects. This experience should enhance a student's ability to perform practical and project work, to be innovative, to solve problems and identify solutions, thereby developing engineering judgement. Students will prepare a career episode report (CER) of less than two pages in length in which they compare their acquired competencies to at least two Engineers Australia (EA) stage 1 competency units. A diary with regular entries must be maintained and periodically certified by the work experience provider as a true and faithful record of the hours the student has completed.
The CER prepared for ENG2909 may be used as a part of the required documentation when applying to Engineers Australia for registration as a Chartered Engineering Officer.
All students should demonstrate at least a basic achievement in two elements drawn from Appendix C, stage 1 competency units, Applicant's hand book for Chartered status, Engineers Australia.
On campus students are advised to contact the Industry Experience and Development Office at Student services for assistance with work experience queries.
Both on-campus and external students will be required to submit their CER and work diary electronically for review and assessment by the due date to permit timely assessment.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- demonstrate practical skills in a selected technical field of engineering;
- demonstrate the ability to undertake and complete assigned tasks in the workplace;
- critically reflect on their achievements and learning during work experience in a CER;
- apply basic health and safety principles in a workplace setting.
|1.||Review The Engineers Australia Professional Development Program (PDP) competencies||10.00|
|2.||Select at least two EA competencies as requirements for the Work Experience component of your program||20.00|
|3.||Arranging and preparing for a period of Work Experience||20.00|
|4.||Undertaking a period of Work Experience||20.00|
|5.||Document a period of Work Experience in your Journal||20.00|
|6.||Submitting your Work Experience Journal and Diary||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=02&subject1=ENG2909)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Engineers Australia, Chartered Status Handbook: Applicant’s handbook for Chartered Professional Engineer, Chartered Engineering Technologist and Chartered Engineering Officer.
ENG1002 Introduction to engineering and spatial science applications: external study package, University of Southern Queensland, Toowoomba.
ENG1101 Introduction to engineering problem solving: external study package, University of Southern Queensland, Toowoomba.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|CAREER EPISODE REPORT||100||100||19 Oct 2012|
|WORK EXPERIENCE DIARY||1||0||19 Oct 2012|
Important assessment information
It is the students' responsibility to attend and participate appropriately in all activities required of them by the work experience provider to maximize their chance of meeting the objectives of the course.
Requirements for students to complete each assessment item satisfactorily:
To complete the practical component satisfactorily, students must submit the nominated practical report and obtain a Pass standard in all of the major sections as described in the assessment scheme.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded.. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
As P is the only passing grade available for this course, all students who are qualified for a
passing grade will be given a grade of P. Other students will be given either a Failing grade
or an Incomplete grade.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au/portal/custom/search/category/usq_document_policy_type/Student.1.html.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
All CER reports and Diaries will be submitted electronically to the Faculty by both on-campus (Toowoomba and Springfield) and external students All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page, that is, Australian Eastern Standard Time).
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination); IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
To be assured of receiving a passing grade, students must be judged to have made a genuine effort to contribute to the work of the team, by other team members.
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/help/referencing/default.htm
Students will normally enrol in the ENG2909 Work Experience - Associate course in the last year of the Associate Degree in Engineering program. However students are strongly encouraged to commence their work experience and related record keeping as early as possible in their program.