INR2002 Contemporary Issues in Asia
|Semester 2, 2012 On-campus Toowoomba|
|Faculty or Section :||Faculty of Arts|
|School or Department :||School of Humanities and Communication|
|Version produced :||21 May 2013|
Examiner: Richard Gehrmann
Moderator: Anna Hayes
Students who have previously enrolled in AST2002 cannot enrol in this course.
Students will require access to e-mail and have internet access to UConnect for this course.
A knowledge of social and political developments in modern Asia is an important life skill for graduates. The disparate forces that have shaped Asian regional development impact both within Asia and on a global level. This course provides a valuable understanding of the nature of the societies within Australia's immediate neighbourhood.
Major theories of political, social and economic development are analysed, with the relevance of these theories to Southeast Asia and East Asia being examined. The political development of Indonesia and Malaysia are used as case studies, with issues such as social and political change, ideologies, the military, political institutions and ethnicity being considered.
On successful completion of this course, students will be able to:
- demonstrate academic and professional literacies by comprehending and applying contemporary scholarly theories on political change and development and the global context of development;
- comprehend and critically assess the process of nation-building and economic development in Asia, and the subsequent social and political changes;
- explain the importance of factors such as the military, ethnicity, political institutions, and ideology in the process mentioned above;
- understand and critically assess the influence of revolutionary, liberal and democratic movements in East and Southeast Asia;
- comprehend and analytically discuss how social and political factors have shaped the governmental systems of selected Asian states;
- communicate in writing by preparing and submitting two essays that address the norms and practices of the discipline.
|1.||Theories of political change and development||10.00|
|2.||Nationalism and nation-building in Asia||10.00|
|3.||Authoritarianism in Asia||10.00|
|4.||Economic development in Asia||10.00|
|5.||The military in development||10.00|
|6.||Ethnicity in Modern Asia||10.00|
|7.||Political Institutions, Culture and Ideology||10.00|
|8.||Revolutionary, liberal and democratic change in East and SE Asia||10.00|
|9.||Regional Political Economy||10.00|
|10.||Future regional developments||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=02&subject1=INR2002)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Kingsbury, D 2005, South-East Asia: A political profile, 2nd edn, Oxford University Press, Melbourne.
Simone, V 2001, The Asian Pacific: political and economic development in a global context, 2nd edn, Longman, New York.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|SHORT ESSAY - 1000 WORDS||100||20||17 Jul 2012|
|MAJOR ESSAY - 2000 WORDS||100||30||03 Oct 2012|
|PARTICIPATION IN TUTORIALS||100||10||09 Nov 2012||(see note 1)|
|2 HOUR WRITTEN EXAMINATION||100||40||End S2||(see note 2)|
- Tutorial participation is based on contribution to class discussions over the term.
- Students will be advised of the official exam date after timetable has been finalised.
Important assessment information
It is the students? responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration. Students must attend and complete the requirements of the Workplace Health and Safety training program for this course where required.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the aggregate of the weighted marks obtained for each of the summative assessment items in the course.
Candidates are allowed access only to specific materials during a Restricted Examination. The only materials that candidates may use in the restricted examination for this course are:
o writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination);
o Students whose first language is not English, may, take an appropriate unmarked nonelectronic translation dictionary (but not technical dictionary) into the examination.
o Dictionaries with any handwritten notes will not be permitted. Translation dictionaries will be subject to perusal and may be removed from the candidate?s possession until appropriate disciplinary action is completed if found to contain material that could give the candidate an unfair advantage.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the next examination period.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au/portal/custom/search/category/usq_document_policy_type/Student.1.html.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Students may be assigned an "Incomplete" grade to signify that all the requirements of the course have not yet been met. Students who are graded "I" can pass the course by successfully completing such additional work as prescribed by the examiner by a given date. Students who have been awarded an IM, ISM, IDM or IDB grade must access information regarding further work to be completed, in the Student Centre of U Connect. The Grades Page in the Student Centre contains information about further work to be completed. Students who have not completed the additional work to the satisfaction of the examiner by the given date will receive the appropriate Failing grade.
Students can expect that questions in assessment items in this course may draw upon knowledge and skills that they can reasonably be expected to have acquired before enrolling in the course. This includes knowledge contained in pre-requisite courses and appropriate communication, information literacy, analytical, critical thinking, problem solving or numeracy skills. Students who do not possess such knowledge and skills should not expect to achieve the same grades as those students who do possess them.