MEC2401 Dynamics I
|Semester 2, 2012 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Mechanical and Mechatronic Engineering|
|Version produced :||30 December 2013|
Examiner: Jayantha Epaarachchi
Moderator: Chris Snook
Pre-requisite: (MAT1502 and CIV1501) or Students must be enrolled in one of the following Programs: GCEN or GDET or METC or MEPR or MENS
A working knowledge of the basic laws of motion and of the concepts of force, energy, momentum, impulse and vibration is fundamental to the study of mechanics and the solution of many engineering problems. In this course these basic concepts are reviewed and a number of techniques are developed to assist in the analysis of the plane motion of particles, bodies, interconnected bodies, mechanisms and geared systems.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- apply the Free Body Diagram Method to solve problems involving the forces on particles and rigid bodies, and to determine their resulting linear and curvilinear motions;
- analyse mechanisms and derive the velocities and accelerations of their rigid body components;
- apply the Work Energy method to the solution of problems involving the motions of systems of particles;
- apply Newton's Laws of Motion, Principles of Conservation of Energy and Momentum and Coulomb's Laws of Friction to problems involving the plane motion of particles, bodies, interconnected bodies, and links within mechanisms;
- select the most appropriate of these techniques for a given problem;
- perform kinematics and force analysis of plane mechanisms;
- analyse free vibration of a single degree of freedom system.
|2.||Kinematics of a particle||10.00|
|3.||Kinetics of a particle: force and acceleration||10.00|
|4.||Kinetics of a particle: work and energy||10.00|
|5.||Kinetics of a particle: impulse and momentum||10.00|
|6.||Planar kinematics of a rigid body||10.00|
|7.||Planar kinetics of a rigid body: force and acceleration||10.00|
|8.||Planar kinetics of a rigid body: work and energy||10.00|
|9.||Planar kinetics of a rigid body: impulse and momentum||10.00|
|10.||Free vibrations with one degree of freedom||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=02&subject1=MEC2401)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Hibbeler, RC 2010, Engineering Mechanics: Dynamics, 12th edn, Prentice Hall, London.
Meriam, JL & Kraige, LG 2007, Engineering Mechanics: Dynamics, 6th edn, Wiley, Hoboken, NJ.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||100||10||24 Aug 2012|
|ASSIGNMENT 2||200||20||19 Oct 2012|
|2 HOUR RESTRICTED EXAMINATION||700||70||End S2||(see note 1)|
- Student Administration will advise students of the dates of their examinations during the semester.
Important assessment information
There are no attendance requirements for this course. However, it is the students' responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded.. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
Candidates are allowed access only to specific material during a Restricted Examination. The only material that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide.
Students will require access to e-mail and internet access to UConnect for this course.