PUB5001 Introduction to Editing and Publishing
|Semester 1, 2012 External Toowoomba|
|Faculty or Section :||Faculty of Arts|
|School or Department :||School of Humanities and Communication|
|Version produced :||30 December 2013|
Examiner: Pamela Hewitt
Moderator: Peter Goodall
Students will require access to e-mail and have internet access to UConnect for this course.
This editing and publishing course is a response to changes in the publishing industry. It gives an overview of modern publishing and introduces students to the roles editors play and the tools and procedures they use. Editors should have an understanding of correct grammar, syntax, language usage, punctuation and capitalisation, and be able to communicate clearly and concisely. As editors use electronic communication for much of their work, students will practise the skills online. Students undertaking this unit are expected to have an undergraduate degree and possess basic literacy and computing skills. There is an expectation that students will be self-directed and will participate in an online discussion group.
This course provides instruction on the tasks involved in publishing, with the emphasis on the editor's role. An analysis of the communication process via a range of print and online material will focus on audience, content, and choosing which forms of media best suit readers and their learning styles. Instruction will follow the stages in structural and copy editing. Proofreading and the tools, resources and procedures required for the various tasks will be explained. Publication design, typography, and formatting will focus on readability and effectiveness of the message including the use of illustrations and tables. Students will be guided through steps in checking layout and colour proofs. Legal and ethical concerns will include copyright and the identification requirements of a book. Students will become familiar with the use of electronic communication and online editing.
On successful completion of this course students should be able to:
- identify the editor's role in the various stages of print and electronic publishing;
- demonstrate an understanding of the communication process between key participants;
- communicate professionally in a range of media;
- analyse different material in terms of its suitability for different media, readers and learning styles;
- demonstrate an understanding of the scope of structural editing and copy editing;
- use standard proofreading marks effectively;
- 6use on-screen techniques, principally Track Changes and Comment functions to mark up electronic files in word processing and other software;
- check design, typography and formatting, illustrations and tables in page proofs and mark appropriate changes;
- demonstrate an understanding of the legal requirements of a range of publications;
- demonstrate information literacy as well as effective electronic communication in directed discussion groups.
|1.||The publishing process and the editor's role||8.00|
|2.||Communication via different types of media with a focus on audience||15.00|
|3.||Editing and proofreading-stages, tools and procedures||23.00|
|4.||Publication design, typography, illustration and formatting||23.00|
|5.||Legal and ethical aspects of publishing||23.00|
|6.||Editing on-screen and online||8.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=01&subject1=PUB5001)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Commonwealth of Australia 2002, Style manual: for authors, editors and printers, 6th edn, John Wiley & Sons Australia, Brisbane.
(Revised by Snooks & Co.)
Flann, E & Hill, B 2004, The Australian editing handbook, 2nd edn, John Wiley & Sons Australia, Brisbane.
Whitbread, D 2009, The design manual, 2nd edn, UNSW Press, Sydney.
Macquarie Dictionary, latest edn (unabridged) OR access to the online version through https://www.macquariedictionary.com.au.
Australian Publishers Association 2007, Introduction to book publishing, 4th (Forward by Tom Keneally) edn, Australian Publishers Association, Sydney.
Peters, P 2004, The Cambridge guide to English usage, Cambridge University Press, Cambridge.
Students are advised to browse through relevant web sites such as the Copyright Council, the Australian Societies of Authors, and various state societies of editors.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|MEDIUM AND AUDIENCE||100||15||29 Mar 2012|
|PROOFREADING EXERCISES||100||45||14 May 2012|
|LEGAL & ETHICAL CONCERNS||100||30||08 Jun 2012|
|PARTICIPATION IN DISC GROUP||100||10||08 Jun 2012||(see note 1)|
- Participation in Discussion Group will be graded in terms of argument and depth of understanding of issues.
Important assessment information
There are no attendance requirements for this course. However, it is the students? responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration. Students must attend and complete the requirements of the Workplace Health and Safety training program for this course where required.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the aggregate of the weighted marks obtained for each of the summative assessment items in the course.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
As there are no examinations in this course, there will be no deferred or supplementary examinations.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Students may be assigned an "Incomplete" grade to signify that all the requirements of the course have not yet been met. Students who are graded "I" can pass the course by successfully completing such additional work as prescribed by the examiner by a given date. Students who have been awarded an IM, ISM, IDM or IDB grade must access information regarding further work to be completed, in the Student Centre of U Connect. The Grades Page in the Student Centre contains information about further work to be completed. Students who have not completed the additional work to the satisfaction of the examiner by the given date will receive the appropriate Failing grade.
Students can expect that questions in assessment items in this course may draw upon knowledge and skills that they can reasonably be expected to have acquired before enrolling in the course. This includes knowledge contained in pre-requisite courses and appropriate communication, information literacy, analytical, critical thinking, problem solving or numeracy skills. Students who do not possess such knowledge and skills should not expect to achieve the same grades as those students who do possess them.