STA3300 Experimental Design
|Semester 1, 2012 External Toowoomba|
|Faculty or Section :||Faculty of Sciences|
|School or Department :||Maths and Computing|
|Version produced :||30 December 2013|
Examiner: Shahjahan Khan
Moderator: Rachel King
Pre-requisite: STA2300 or Students must be enrolled in one of the following Programs: MSBN or MSMS
The proper design, implementation and analysis of results of experiments are of vital importance in many disciplines. The validity and reliability of research findings can be severely compromised if a poor design or experimental procedure is followed. This course introduces principles of good design in experiments and discusses appropriate methods of analysis of planned experiments. This course has relevance to all students involved in or planning to be involved in experimental projects, especially students in the general science disciplines. Previous statistical knowledge to the level of STA2300 Data Analysis only is assumed.
This course covers principles of design such as randomisation, replication, factorial arrangement and blocking. Practical experience is gained in designing, carrying out, analysing and writing up the results of an experimental study. Methods of analysis are discussed and practiced, mainly on computer. The emphasis is on general principles of design and analysis rather than in describing the details of particular design layouts. Consideration is given to assumption checking, robustness, prior and posterior analysis, contrasts, confounding, covariates, error control and reduction, and interpretation of results.
On completion of this course students will be able to:
- recognise the need for and implement procedures for randomisation;
- recognise the importance of factorial arrangements and replication;
- recognise the advantages and disadvantages of blocking;
- analyse a data set in an appropriate fashion using a computer package;
- interpret the results of an analysis in everyday terms.
|1.||Data Screening - introduction to a computer package - exploratory and preliminary analysis - descriptive and graphical tools - transformations||10.00|
|2.||Inference - hypothesis testing and p values - estimation and confidence intervals - comparative experiments, independent and dependent samples - linear regression, dummy variables||10.00|
|3.||Introduction to experimentation - observational v experimental studies - causality and association - validity - some design principles||10.00|
|4.||Completely randomised designs with one factor - experimental procedure - principle of randomisation - modelling the data - analysis of variance and interpretation - descriptive techniques - residual analysis - nonparametric techniques||15.00|
|5.||Analytic comparisons - contrasts, simple and complex - planned and unplanned comparisons - multiple comparisons and error rates - Newman-Keuls range tests||15.00|
|6.||Balanced factorial experiments - principles of factorial arrangement- descriptive techniques- main and interaction effects- multiway analysis of variance- estimation of effects- model fitting||15.00|
|7.||Blocking- principle of error reduction- single and multifactor arrangements- random and fixed effects - calculation of expected mean squares - components of variance||15.00|
|8.||Regression Analysis - analysis and interpretation- analysis of covariance- trend analysis||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2012&sem=01&subject1=STA3300)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Introductory Book 2012, Course STA3300 Experimental Design, included in the course CD.
Selected Readings 2012, Course STA3300 Experimental Design, included in the course CD.
SPSS Windows Software, Prentice Hall.
(Student Version 17.0 for Windows (Version 15.0 or later is acceptable) available through USQ Bookshop.)
Study Book 2012, Course STA3300 Experimental Design, included in the course CD.
Box, G E P, Hunter, W G & Hunter, J S 1978, Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building, Wiley, New York.
Coakes, S J, Steed, L G & Ong, C 2009, SPSS: Analysis without Anguish, John Wiley & Sons, Australia.
(Version 16.0 for Windows 005.36 Coa.)
Hicks, C R 1999, Fundamental Concepts in the Design of Experiments, 5th edn, Oxford University Press, New York.
Mason, R L, Gunst, R F & Hess, J L 2003, Statistical Design and Analysis of Experiments with Applications to Engineering and Science, 2nd edn, Wiley, New York.
Maxwell, S E & Delaney, H D 2003, Designing Experiments and Analysing Data: A Model Comparison Perspective, 2nd edn, Wadsworth, Belmont.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||100||10||23 Mar 2012|
|ASSIGNMENT 2||100||10||27 Apr 2012|
|ASSIGNMENT 3||100||10||18 May 2012|
|PROJECT PROPOSAL||0||0||25 May 2012|
|PROJECT||100||20||22 Jun 2012|
|2HR RESTRICTED EXAM||100||50||End S1||(see note 1)|
- Examination dates will be available during the Semester. Please refer to Examination timetable when published.
Important assessment information
There are no attendance requirements for this course. However, it is the students' responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To complete an assessment item satisfactorily, students must obtain at least 50% of the marks available for that assessment item. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in the course.
Penalties for late submission of required work:
If students submit assignments after the due date without prior approval then a penalty of 5% of the total marks gained by the student for the assignment will apply for each working day late late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks obtained for each of the summative assessment items in the course.
In a Restricted Examination, candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); calculators. Students whose first language is not English, may, take an appropriate unmarked non-electronic translation dictionary (but not technical dictionary) into the examination. Dictionaries with any handwritten notes will not be permitted. Translation dictionaries will be subject to perusal and may be removed from the candidate's possession until appropriate disciplinary action is completed if found to contain material that could give the candidate an unfair advantage.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the next examination period.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours of receipt of a request to do so from the Examiner.
The referencing system to be used in this course is supported by the Department. Information on this referencing system and advice on how to use it can be found in the course materials.