CIS2000 Systems Analysis and Design
|Semester 1, 2013 On-campus Toowoomba|
|Faculty or Section :||Faculty of Business and Law|
|School or Department :||School of Information Systems|
|Version produced :||21 July 2014|
Examiner: Abdul Hafeez-Baig
Moderator: Dave Roberts
Students are required to have access to a personal computer, e-mail capabilities and Internet access to UConnect. Current details of computer requirements can be found at http://www.usq.edu.au/current-students/support/computing/hardware.
This is the initial information systems course and it introduces students to the fundamental concepts and terminology used in business systems analysis and design by examining procedures, systems, the components of information systems, common business information systems, types of information systems, and organizational levels. Case studies are used to apply the concepts and techniques involved.
One of the major strands in the information technology field is that of systems analysis and design. The analysis of case studies requires effective listening and reading skills. The students will study analysis techniques and then design appropriate solutions. The design requires the production of accurate, understandable and efficient systems requirement documents using formats which will maximize effective communication. Some typical business information systems will be studied. A CASE product will be utilized.
On successful completion of this course, students should be able to:
- define and demonstrate an understanding of the fundamental concepts and terminology used in business systems analysis and design
- identify the basic assumptions and controls involved in the analysis and design of typical business application
- outline and demonstrate an appreciation of the functions and inter-relationships of typical business applications
- develop competence in the definition and design of process models based on appropriate data models
- demonstrate an appreciation of sound computer interface principles
- effectively communicate ideas using tools and techniques of systems analysis and design.
|1.||The systems development life cycle||5.00|
|6.||Financial analysis tools||10.00|
|7.||Project management tools||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=01&subject1=CIS2000)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Lahey, H (ed) 2000, Information systems developers handbook: a road map for students, University of Southern Queensland, Toowoomba, Queensland.
(This handbook is available on the USQ website at http://www.usq.edu.au/business-law/schools/is/isdevhandbook.htm.)
Shelly, GB & Rosenblatt, HJ 2012, Systems analysis and design, 9th edn, Thomson Course Technology, Boston, Massachusetts.
Summers, J & Smith, B 2010, Communication skills handbook, 3rd edn, John Wiley & Sons, Milton, Queensland.
Booch, G 2007, Object-oriented analysis and design with applications, 3rd edn, Addison-Wesley Professional, Reading, Massachusetts.
Date, CJ 2004, An introduction to database systems, 8th edn, Pearson/Addison-Wesley, Boston, Massachusetts.
Hawryszkiewycz, IT 2001, Introduction to systems analysis and design, 5th edn, Prentice Hall, Frenchs Forest, New South Wales.
Kendall, KE & Kendall, JE 2010, Systems analysis and design, 8th edn, Pearson Prentice Hall, Upper Saddle River, New Jersey.
Whitten, JL & Bentley, LD 2007, Systems analysis and design methods, 7th edn, McGraw-Hill/Irwin, Boston, Massachusetts.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|A1 PROJECT MANAGEMENT||5||5||27 Mar 2013|
|A2 FINANCIAL ANALYSIS||5||5||17 Apr 2013|
|A3 DECISION TABLE||5||5||24 Apr 2013|
|A4 DATAFLOW DIAGRAM||10||10||08 May 2013|
|A5 UNIFIED MODELLING LANGUAGE||5||5||15 May 2013|
|A6 DESIGN||10||10||22 May 2013|
|ON-LINE TEST||15||15||05 Jun 2013|
|2-HOUR EXAMINATION||100||45||End S1||(see note 1)|
- The examination is scheduled to be held in the end-of-semester examination period. Students will be advised of the official examination date after the timetable has been finalised.
Important assessment information
It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)
Penalties for late submission of required work:
If students submit assignments after the due date without prior approval of the examiner, then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the aggregate of the weighted marks obtained for each of the summative assessment items in the course.
This is a restricted examination. Candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the examination for this course are (i) Writing materials: non-electronic and free from material which could give the student an unfair advantage in the examination; (ii) Translation dictionaries: with the examiner's approval, candidates may, take an appropriate non-electronic translation dictionary into the examination. This will be subject to perusal and, if it is found to contain annotations or markings that could give the candidate an unfair advantage, it may be removed from the candidate's possession until the appropriate disciplinary action is completed; and (iii) calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination).
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the next examination period.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
Assignments: (i) The due date for an assignment is the date by which a student must submit the assignment to the USQ. (ii) Students must retain a copy of each assignment submitted for assessment. This must be produced within 24 hours if required by the examiner. (iii) In accordance with university policy, the examiner may grant an extension of the due date of an assignment in extenuating circumstances. (iv) The examiner will normally only accept assessments that have been written, typed or printed on paper-based media. (v) In the event that a due date for an assignment falls on a local public holiday in their area, such as a show holiday, the due date for the assignment will be the next day. Students are to note on the assignment cover the date of the public holiday for the examiner's convenience.
Course weightings: Course weightings of topics should not be interpreted as applying to the number of marks allocated to questions testing those topics in an examination paper.
Referencing in assignments: Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide at http://www.usq.edu.au/library/referencing.
Make-up work: Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study.
Deferred work: Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded: IDS (Incomplete - Deferred Examination); IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Computer, e-mail and Internet access: Students are required to have access to a personal computer, e-mail capabilities and Internet access to UConnect. Current details of computer requirements can be found at http://www.usq.edu.au/current-students/support/computing/hardware.