USQ LogoCourse specification
The current and official versions of the course specifications are available on the web at http://www.usq.edu.au/course/specification/current.
Please consult the web for updates that may occur during the year.

CIV3907 Civil Systems Practice

Semester 3, 2013 External Toowoomba
Units : 0
Faculty or Section : Faculty of Engineering & Surveying
School or Department : Agricultural, Civil, Environmental Engineering
Version produced : 21 July 2014

Contents on this page

Staffing

Examiner: Sourish Banerjee
Moderator: Karu Karunasena

Requisites

Pre-requisite: CIV2503 or Students must be enrolled in one of the following Programs: GDNS or MENS

Synopsis

These days most engineering tasks require a "system approach". Knowledge, design skills, theory, equipment etc will have to be combined in a systematic way to complete a complex task. This course is a practical introduction to this approach. Elementary building blocks and theory covered in previous courses will be combined to design and develop more complex systems. Team work often goes hand in hand with a system approach; hence working in teams will be an essential part of this course. Systems that will be covered include structural systems such as concrete and steel, destructive and non-destructive testing, water and sewerage systems. Teams of students will cast and test a reinforced concrete beam and test the buckling strength of a steel column, and describe their behaviour. It will also include using various non-destructive equipments for structural testing and a visit to a water and sewerage treatment plant.

Objectives

The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:

  1. cast concrete beams and cylinders;
  2. test a reinforced concrete beam in flexure and describe its behaviour under load;
  3. determine the buckling load of a steel column and use the Southwell plot to predict its buckling load;
  4. operate various non-destructive structural testing equipments;
  5. inspect and report on the operation of water and sewerage treatment facilities;
  6. appreciate workplace health and safety requirements.

Topics

Description Weighting(%)
1. Concrete beam casting & testing 30.00
2. Non-destructive testing of concrete structures 25.00
3. Buckling of steel columns 20.00
4. Water and sewerage treatment 25.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=03&subject1=CIV3907)

Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)

  • There are no texts or materials required for this course.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.

Student workload requirements

Activity Hours
Laboratory or Practical Classes 30.00
Report Writing 20.00

Assessment details

Description Marks out of Wtg (%) Due Date Notes
REPORT 1 100 07 Feb 2014 (see note 1)

NOTES
  1. Only reports that are typed or handwritten in ink will be marked.

Important assessment information

  1. Attendance requirements:
    This course requires attendance at a residential school It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

  2. Requirements for students to complete each assessment item satisfactorily:
    To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)

  3. Penalties for late submission of required work:
    If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.

  4. Requirements for student to be awarded a passing grade in the course:
    To be assured of receiving a passing grade students must satisfactorily complete (as defined in Statement 2) at least 100% of the practical and other activities.

  5. Method used to combine assessment results to attain final grade:
    As P is the only passing grade available for this course, all students who are qualified for a passing grade, under the requirements in 4 above, will be given a grade of P. Other students will be given either a Failing grade or an Incomplete grade.

  6. Examination information:
    There is no examination in this course.

  7. Examination period when Deferred/Supplementary examinations will be held:
    Not applicable.

  8. University Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.

Assessment notes

  1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.

  2. Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.

  3. In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.

  4. If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).

  5. If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.

  6. The Faculty will NOT normally accept submission of assessments by facsimile or email.

  7. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.

  8. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study.

  9. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).

  10. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing

Other requirements

  1. Students must wear Type 1 safety boots (steel capped) with AS/NZS 2210 standards when participating in laboratory and field works.