ELE3401 Software Engineering Design Principles
|Semester 1, 2013 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Electrical, Electronic & Computing|
|Version produced :||21 July 2014|
Examiner: Hong Zhou
Moderator: Wei Xiang
Recommended prior or concurrent study: CIS3001 and CSC2407
Software-based systems play a pivotal role in society. As a consequence of both the increasing reliance on software systems and the increasing complexity of software development processes, there is a need to formally address the underlying processes of software design, development, deployment and maintenance in an educational context. The software engineering graduate is expected to have a sound grasp of software design methodologies so as to be able to understand the role of the working software engineer in both small and large-scale software development teams. Since programming languages and development tools evolve, this course addresses issues of software system specification, design, testing, and maintenance in a manner which is largely independent of language issues and operating systems.
In this course the student will gain a broad understanding of all aspects of the software development process. The topics covered include end-user requirements analysis and specification, the software lifecycle, design and specification techniques, component testing and integration testing, and maintenance and cost issues, together with an introduction to software project management. The selection of software development paradigms, design for re-use, test coverage, coding and documentation conventions, and revision management tools are examined. Current and emerging thinking in software development is addressed using professional literature and industry case studies. The course is enhanced by the coverage of other aspects such as ethical considerations and team psychology.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- create and interpret software design schema;
- analyse, design and test computer software using object paradigm;
- read and write Requirements Analysis Document using UML models;
- read and develop System Design Document and Object Design Document;
- explain several typical software architectures and design patterns;
- design and execute test cases using black box and white box techniques;
- describe the activities involved in software rationale management, project management and quality management;
- explain the role of Computer-Aided Software Engineering (CASE) tools;
- describe the design principles of user interface design;
- define the common security and robustness issues in software development;
- analyse relevant literature in software engineering; and
- describe the role and function of professional bodies associated with software engineering.
|1.||Requirement Elicitation and Analysis||25.00|
|2.||System and Object Design||30.00|
|5.||User Interface Design, CASE and Security||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=01&subject1=ELE3401)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Bruegge, B & Dutoit, A 2004, Object-oriented software engineering using UML, Patterns and Java, 2nd edn, Prentice Hall, Upper Saddle River, NJ.
ELE3401 Software engineering design principles: lecture notes. (UConnect ELE3401 Study Desk).
Pressman, RS 2005, Software engineering: a practitioner's approach, 6th edn, McGraw-Hill, Boston.
Sommerville, I 2007, Software engineering, 8th edn, Addison-Wesley, New York.
Stevens, P & Pooley, R 2006, Using UML - software engineering with objects and components, 2nd edn, Addison-Wesley, Harlow.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||200||20||19 Apr 2013|
|ASSIGNMENT 2||200||20||31 May 2013|
|2 HOUR CLOSED EXAMINATION||600||60||End S1||(see note 1)|
- Student Adminstration will advise students of the dates of their examinations during the semester.
Important assessment information
There are no attendance requirements for this course. However, it is the students' responsibility to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
In a Closed Examination, candidates are allowed to bring only writing and drawing instruments into the examination.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing
Students will require access to e-mail and internet access to UConnect for this course.