ENV2201 Land Studies
|Semester 1, 2013 On-campus Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Agricultural, Civil, Environmental Engineering|
|Version produced :||21 July 2014|
Examiner: John Bennett
Moderator: Steven Raine
Professionals in arts, science, education, engineering and surveying are increasingly required to have a knowledge of physical land resources and natural resources management. This course provides an introduction to the physical land resources of geology, soils, landform, climate, vegetation and fauna, the principles of resource management and ecosystem operation and the major causes of land degradation. It also includes an introduction to the methods involved in undertaking land resource surveys and land evaluations, and includes the processes and legislative requirements associated with environmental impact assessments.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- demonstrate an understanding of the principles of resource management;
- describe the inter-relationships between geology, geomorphology, water, soils, vegetation and fauna resources;
- apply the techniques commonly used to describe and assess the physical land resources;
- demonstrate an understanding of land degradation issues and conservation practices;
- describe the processes involved in undertaking land resource surveys and land evaluation practices;
- demonstrate a knowledge of the requirements for environmental impact statements and the techniques involved in environmental impact assessment.
|1.||Introduction to Resource Management||5.00|
|2.||Introductory Ecology & Ecosystems Management||15.00|
|3.||Introduction to the Physical Land Resources||45.00|
|4.||Land Degradation issues and Conservation Practices||15.00|
|5.||Land Resource Survey and Evaluation||8.00|
|6.||Environmental Impact Assessment||12.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=01&subject1=ENV2201)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
- There are no texts or materials required for this course.
Brady, NC 2008, The nature and properties of soils, 14th edn, Prentice Hall, Harlow.
Erickson, PA 1994, A practical guide to environmental impact assessment, Academic Press, San Diego.
Gilpin, A 1995, Environmental impact assessment: cutting edge for the twenty- first century, Cambridge University Press, Cambridge.
Gunn, RH, Beattie, JA, Reid, RE & Van de Graaff, RHM 1988, Australian soil and land survey handbook: guidelines for conducting surveys, Inkata Press, Melbourne.
McDonald, RC, Isbell, RF, Speight, JG, Walker, J & Hopkins, MS 2008, Australian soil and land survey: field handbook, 3rd edn, CSIRO Publishing, Collingwood, Vic.
Student workload requirements
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||200||20||22 Mar 2013|
|ASSIGNMENT 2||300||30||24 May 2013|
|2 HOUR CLOSED EXAMINATION||500||50||End S1||(see note 1)|
- Student Administration will advise students of the dates of their examinations during the semester.
Important assessment information
It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
In a Closed Examination, candidates are allowed to bring only writing and drawing instruments into the examination.
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
This is a communication benchmark course and a major component of the assessment of this course will be associated with the demonstration of communication skills.
Students who fail to demonstrate satisfactory communication skills, as described in the assessment scheme, will be required to resubmit the assignments and meet the communication skills requirements in order to achieve a passing grade in this course.
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing