Course specification
The current and official versions of the course specifications are available on the web at http://www.usq.edu.au/course/specification/current.
Please consult the web for updates that may occur during the year.

# MEC2402 Stress Analysis

 Semester 1, 2013 On-campus Springfield Units : 1 Faculty or Section : Faculty of Engineering & Surveying School or Department : Mechanical and Mechatronic Engineering Version produced : 25 May 2013

## Staffing

Examiner: David Buttsworth
Moderator: Sourish Banerjee

## Requisites

Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or GDET or METC or MEPR or GCNS or GDNS or MENS

## Synopsis

Every structure or machine has to perform its intended function within a predetermined and acceptable probability of failure. Stress analysis addresses the stability and strength of structures and machines while under load. It predicts how force is carried through a structure or machine and how the materials at any point in any individual member resist the force. As such, stress analysis is essential to the design function and the analysis function. Every engineer who has to make a judgement on the strength and stability of any structure, machine or mechanism, no matter how simple or how complex, must understand the fundamental principles of stress analysis.

## Objectives

The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:

1. review and apply the principles of static equilibrium to the analysis of structures such as pressure vessels, beams, and torsion members;
2. evaluate stress and strain within various structures by applying the appropriate engineering theories;
3. formulate solutions to problems requiring the application of suitable engineering theories for stress and strain;
4. locate and calculate the highest equivalent stress on any section of a beam or shaft undergoing simple or combined loading, and determine if yield failure will occur.

## Topics

Description Weighting(%)
1. Normal stress and strain 5.00
2. Pressure vessels 5.00
3. Shear stress and strain 5.00
4. Torsional members 10.00
5. Stress analysis 15.00
6. Strain analysis 10.00
7. Theories of elastic failure 10.00
8. Normal stress in beams 10.00
9. Shear stress in beams 10.00
11. Elastic plastic analysis 5.00
12. Buckling 5.00

## Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=01&subject1=MEC2402)

• Beer, Johnston & DeWolf 2009, Mechanics of materials, 5th edn, McGraw-Hill Higher Education, New York.
(in SI units.)

## Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.

Activity Hours
Assessments 16.00
Directed Study 77.00
Examinations 2.00
Lectures 34.00
Tutorials 26.00

## Assessment details

Description Marks out of Wtg (%) Due Date Notes
ASSIGNMENT 1 80 8 22 Mar 2013
ASSIGNMENT 2 120 12 26 Apr 2013
ASSIGNMENT 3 200 20 24 May 2013
2 HOUR RESTRICTED EXAMINATION 600 60 End S1 (see note 1)

NOTES
1. Student Administration will advise students of the date of their examination during the semester.

## Important assessment information

1. Attendance requirements:
It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

2. Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Refer to Statement 4 below for the requirements to receive a passing grade in this course.

3. Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.

4. Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade in a course a student must obtain at least 50% of the total weighted marks for the course.

5. Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.

6. Examination information:
In a Restricted Examination, candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); hand-held, battery-operated calculator which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination); an A4 sheet (two sides) containing any information that they believe will be relevant for the examination. The A4 sheet must be submitted with the exam booklets. No other materials are permitted in the examination. Charts, tables and graphs needed for the solution of the examination problems will be provided with the examination paper.

7. Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the examination period at the end of the semester of the next offering of this course.

8. University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au/portal/custom/search/category/usq_document_policy_type/Student.1.html.

## Assessment notes

1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.

2. Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.

3. In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.

4. If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).

5. If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.

6. The Faculty will NOT normally accept submission of assessments by facsimile or email.

7. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.

8. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.

9. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).

10. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/help/referencing/default.htm