MEC2901 Mechanical Practice 1
|Semester 3, 2013 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Mechanical and Mechatronic Engineering|
|Version produced :||21 July 2014|
Examiner: Peter Penfold
Moderator: Chris Snook
The successful practice of the profession of Mechanical Engineering requires a clear understanding of the relationship between engineering theory and engineering practice. An ability to recognise when a particular theory is applicable and an ability to accommodate the deviations from the theory that occur in the real world is essential. Some knowledge of a wide range of practical techniques, propriety devices, materials, production and assembly methods is also necessary. The engineer must be able to assess a complex situation to identify the critical elements and develop a workable, cost-effective solution. This all requires considerable self-confidence, and the ability to work in and also lead a team. This course continues the step by step development of these skills commenced in ENG1901 Engineering Practice 1 but within a Mechanical Engineering context.
This course presents a series of activities designed to develop specific skills and knowledge relevant to Mechanical Engineering. These activities are to be carried out on an individual or small group basis.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- conduct and evaluate engineering tests in accordance with set procedures;
- use common engineering length measurement instruments;
- operate Milling and Turning Machine tools to produce a simple component;
- make a sand mould to produce a simple cast component;
- employ safe working practices.
|2.||Meast. fundamental properties||10.00|
|4.||Performance tests (basic)||20.00|
|5.||Electrical Engineering Activity||20.00|
|7.||Strip and assembly||10.00|
|8.||Safety in manufacturing||5.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=03&subject1=MEC2901)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
Students will need safety footwear when undertaking some activities in this course. Either safety shoes or safety boots are suitable.
Holman, JP 2001, Experimental methods for engineers, 7th edn, McGraw Hill, Boston.
Student workload requirements
|Laboratory or Practical Classes||40.00|
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|GROUP REPORT||500||50||07 Feb 2014|
|PRACTICAL WORK||500||50||07 Feb 2014|
Important assessment information
(i) This course requires attendance at a residential school It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration. (ii) Students must attend and complete the requirements of the Workplace Health and Safety training program for this course before they are able to undertake any practical work in the electrical and mechanical laboratories.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete assessment one - students must submit a group report, before the due date, and obtain at least 50% of the marks. To satisfactorily complete assessment two - students must submit a Course Progress form with all the completed tasks signed off by their supervisors. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
If students submit assignments after the due date without (prior) approval of the examiner then a penalty of 5% of the total marks gained by the student for the assignment may apply for each working day late up to ten working days at which time a mark of zero may be recorded. No assignments will be accepted after model answers have been posted.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade students must complete the report and complete at least 95% of the practical and other activities at a satisfactory standard, as stated in the course Assessment Scheme.
Method used to combine assessment results to attain final grade:
As P is the only passing grade available for this course, all students who are qualified for a passing grade, under the requirements in 4 above, will be given a grade of P. Other students will be given either a Failing grade or an Incomplete grade.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing