SVY2903 Surveying and Spatial Science Practice 3
|Semester 3, 2013 External Toowoomba|
|Faculty or Section :||Faculty of Engineering & Surveying|
|School or Department :||Surveying & Spatial Science|
|Version produced :||21 July 2014|
Examiner: Xiaoye Liu
Moderator: Glenn Campbell
Pre-requisite: SVY1901 and SVY1102 or Students must be enrolled in one of the following Programs: GCNS or GDNS or MENS
Recommended prior or concurrent study: SVY2303, CIV2701 and SVY3304
The course is intended to provide students with a core of basic industrial skills required for the practical applications of Surveying and Spatial Science in the workplace. Students will have the opportunity to select and complete four workshops that best reflect their needs for practical instruction. Techniques required in cadastral surveying, urban planning, photogrammetry, remote sensing, laser scanning, real time kinematic GPS and GIS programming exercises can be undertaken by students as individual modules.
The course objectives define the student learning outcomes for a course. Depending on their selection, on completion of this course, students should be able to:
- demonstrate competence in real time kinematic GPS Surveying;
- apply practical cadastral methods to solving cadastral surveying problems;
- undertake techniques and show competence in computer programming for GIS;
- demonstrate knowledge of the techniques required for photogrammetry, remote sensing and laser scanning in spatial science;
- demonstrate a sound knowledge of planning principles and the fundamentals of urban planning;
- demonstrate an ability to analyse and propose solutions to technical problems in accordance with established practices and precedents;
- present surveying results with an acceptable level of written and oral communication skills.
|1.||Self Selected Workshop 1||25.00|
|2.||Self Selected Workshop 2||25.00|
|3.||Self Selected Workshop 3||25.00|
|4.||Self Selected Workshop 4||25.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://bookshop.usq.edu.au/bookweb/subject.cgi?year=2013&sem=03&subject1=SVY2903)
Please contact us for alternative purchase options from USQ Bookshop. (https://bookshop.usq.edu.au/contact/)
- There are no texts or materials required for this course.
CIV2701 Road design and location: external study package, University of Southern Queensland, Toowoomba.
SVY2301 Automated surveying systems: external study package, University of Southern Queensland, Toowoomba.
SVY2303 Construction surveying: external study package, University of Southern Queensland, Toowoomba.
SVY3304 Cadastral surveying: external study package, University of Southern Queensland, Toowoomba.
Student workload requirements
|Laboratory or Practical Classes||32.00|
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|REPORTS & PRACTICAL WORK||100||100||07 Feb 2014||(see note 1)|
- Reports are due on the Friday of the residential school week.
Important assessment information
This course requires attendance at a residential school It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete the practical component of this course, students must complete all of the practical and other activities and submit all reports by the due date.
Penalties for late submission of required work:
Practical reports submitted after the due date will not be assessed.
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade, students must complete at least 90% of the practical and other activities at a satisfactory standard, as stated in the course Assessment Scheme.
Method used to combine assessment results to attain final grade:
As P is the only passing grade available for this course, all students who are qualified for a passing grade, under the requirements in 4 above, will be given a grade of P. Other students will be given either a Failing grade or an Incomplete grade.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
The Faculty will NOT normally accept submission of assessments by facsimile or email.
Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide.