Where Can I Get LaTEX

Introduction

To see all the LaTeX material available, go to the main Comprehensive Tex Archive Network (CTAN) or an Australian CTAN mirror. If you wish to keep these instructions on-screen whilst viewing another page, then rather than just clicking on the link, press shift-click. This will make it easier to follow instructions as to what to download.

The main site for MiKTeX for Windows is in Germany, at http://www.miktex.org/, another is in the United States at http://www.ctan.org/tex-archive/systems/win32/miktex/. Australian residents will find it faster to use the Australian MiKTeX mirror at http://mirror.aarnet.edu.au/pub/CTAN/systems/win32/miktex/. In the pages that follow, the Australian mirror site list listed first, followed by the main distribution site in brackets. For example: go to the Australian mirror (alternate site). The mirror site is generally faster, if you have access from an address within Australia. If elsewhere, there is no advantage in using the mirror site, and you should go straight to the alternate site.

The following notes are based on MiKTeX 2.5 running on Windows XP. Your specific setup may vary. If you download the "basic" distribution as recommended, it's around 45M. These are only intended to be a quick getting-started guide, together with some hints for customization - please see the official MiKTeX documentation (FAQ's, mailing list, installation notes) in the event of problems. After downloading any new system components, you should always scan your disk for viruses.

A note about saving files from your web browser: at various stages in this installation, you will be instructed to save files from a location (link) to your local hard drive. Do this via right-clicking on the link and then selecting Save Target As. In the dialog box that comes up, you should not change the file name, but you must change the "Save as type" box to "All Files". If you don't do this, Windows will add another extension to your filename, and LaTeX (or any other program) will not be able to see it. Of course, this is not applicable where you are just clicking on a link to follow it to another page, it only applies where you are told to save a file.

You need three items of software:

LaTeX - the formatting program to translate LaTeX commands in the source file. The specific port of LaTeX to Windows which we recommend is MiKTeX.
A plain text editor - any will do, but the shareware winedt (main site) is highly recommended. Winedt includes buttons for LaTeX document creation, which you may prefer over having to run the command-line compilation as described below. A free editor is Crimson Editor.
A PDF file viewer, such as Acrobat Reader. It's free from Adobe.

Preliminary Setup

Although not strictly necessary, I recommend some changes to the windows interface to avoid confusion.
Select MyComputer - Control Panel - Appearance and Themes - Folder Options.
Select the option Show Hidden Files; to be ON;
Select the option Hide Extensions for Known File Types; to be OFF;
Select the option Show Full Path in the title bar; to be ON;
Create a work folder, such as c:\MyWork\latex\test (or wherever you want to park your project files).
Create the folder c:\archive\miktex (that is, on MyComputer, select Local C: Drive; then create archive, then in that folder create miktex. This will be used to store the downloaded files for the application. It is recommended that you backup this location to a CD or some other media after the download is completed, as it can be used to re-install MiKTeX at a later date if necessary. start-run and type cmd. You then have a Windows command prompt, and may use commands such as cd to change directory, dir to get a directory listing, md (or mkdir) to make a directory. Type help for more command information, and exit to close the command prompt window.
Create a shortcut to a command prompt, by right-clicking on the desktop, selecting new-shortcut, and finding cmd.exe. When the shortcut is set up, right-click on it and select Properties, then select Start In, and change the string to c:\MyWork\latex\test.

Download & Install

Go to the setup folder at MiKTeX setup folder (alternate site).
Download setup.exe by right-clicking to save it to the download location such as c:\archive\miktex.
Double-click on setup to run it.
It is possible to install over the network, but it is suggested that you select the download only option to download all the files onto your hard drive. This will allow you to re-install it at a later date, if necessary.
Select download, basic package set, and the country/site to one of the sites that is closest to you (to maximize the download speed). It is recommended you use defaults for other settings.
When the download has completed, run the setup program setup.exe in the downloaded folder. This time you can select install from local repository (that is, from your hard drive). Again select basic package set.
Download the style files a4page.sty and a4pdf.sty to your work folder. Do this via right-clicking on the link and then selecting Save Target As. In the dialog box that comes up, you should not change the file name, but you must change the "Save as type" box to "All Files". If you don't do this, Windows will add another extension to your filename, and LaTeX (or any other program) will not be able to see it.
Download the file sample.tex
Start the command window from the icon created previously, and type
pdflatex sample
You should be able to open the resulting file sample.pdf using Acrobat Reader (if your file extensions are set up, you can just type sample.pdf on the command-line, and it will fire up Acrobat directly).

Extra notes on MiKTeX installation (advanced use only)

From time to time you may need to download various updates for fonts, layout, and so forth. MiKTeX is able to do this "on-demand" (i.e. as needed). To check this configuration option, click Start-Programs-MiKTeX-MiKTeX Options, click the General tab. There you will find a Package Installation option - I recommend selecting No for this option, otherwise MiKTeX will try to download additional files when needed. You may, however, choose to set this to Ask Me First - but be aware that it will attempt to connect to a download site for this.
If you use some packages in many projects, you can place the common files in one location. You need to create a folder such as texinputs (can be any name) under C:\Program Files\MiKTeX 2.5\tex\latex, then tell MiKTeX where to find your files: Start-Programs-MiKTeX-MiKTeX Options, click the roots tab, click add, and under My Computer point to C:\Program Files\MiKTeX 2.5\tex\latex\texinputs. Then click Refresh FNDB to update the filename database. This step is necessary so that MiKTeX knows where to find the files for your system. Similarly, you can create bibliography style files and put them in bibinputs under C:\Program Files\MiKTeX 2.5\bibtex,
Additional LaTeX add-ons such as style files (alternate site) and fonts (alternate site) are available - download as required an refresh the FNDB as above.
You can also purchase the Acrobat software package, if you need to manipulate PDF files. It's available from the USQ Bookshop. Note that it is not required that you purchase it - but if you do need to print multiple pages onto one, edit/comment PDF files directly, and many other tasks, it is invaluable.