Master of Engineering (MENG) - MEng

CRICOS code (International applicants): 003595K

This program is offered only to continuing students. No new admissions will be accepted. Students who are interested in this study area should consider the Master of Engineering Research (MENR) which, subject to approval, will be offered from Semester 1, 2009.

Contact us

Program focus

This is a research degree which allows students to develop critical research skills in their area of specialisation. A dissertation is produced, based on the research undertaken.

Program objectives

The principal aim of the program is to produce graduates who are highly competent in research and development work in engineering. Specifically, graduates of the program will be able to demonstrate:

• a broad knowledge of engineering practice in agricultural, civil, computer systems, electrical, electronic, environmental, mechanical or mechatronic engineering

• an extensive and detailed knowledge of one significant aspect of engineering at a level that allows for the proposal and evaluation of innovative solutions to complex technical problems in that area

• an exhaustive knowledge of, and ability to access, sources of information about Australian and overseas engineering practice in agricultural, civil, electrical, electronic, environmental, mechanical or mechatronic engineering

• an ability to utilise sound research methodology and experimental design in an investigative study

• an awareness of the practical applications and the implications for the industry of the research work that has been undertaken

• a high standard of written communication on technical matters.

Admission requirements

All candidates for admission to the program will have demonstrated a high level of ability at the undergraduate level or will have demonstrated, in pursuit of their occupation or by other means, their ability to undertake successfully studies at this level.

Specifically, a candidate will normally be considered for admission to a place in the Master of Engineering program if the candidate either:

• holds a four-year bachelor's degree in engineering awarded by an Australian university or university college, or an equivalent qualification awarded by an overseas institution

• can demonstrate a high level of academic performance in their undergraduate studies

or

• holds a bachelor's degree in science, applied mathematics, or a related field of study awarded by an Australian university or university college, or an equivalent qualification awarded by an overseas institution

• can demonstrate a high level of academic performance in their undergraduate studies

• has completed a qualifying program of engineering studies approved by the Dean of the Faculty of Engineering and Surveying

or

• has worked as a professional engineer in a position of responsibility for a period of not less than three years and can provide documentary evidence, such as technical publications, that satisfies the Dean of the Faculty of Engineering and Surveying that advanced knowledge has been acquired

• successfully completes an interview conducted by the Dean of the Faculty of Engineering and Surveying or his/her nominee to assess the candidate's chance of success in the program.

  International students must meet the University's English language proficiency requirements for postgraduate students. Refer to Academic Regulation 5.4

Program fees

Tuition fee

Domestic fee-paying places are funded entirely through the tuition/direct fees paid by the student. Tuition/direct fees vary depending on the courses that are taken. For more information about Tuition Fees, including the calculation of fees for a particular program of study, refer to USQ Fees.

International fees

International students pay tuition fees. For details about international student fees, refer to the International Fee Schedule provided by USQ International.

Research training scheme (RTS)

The Research Training Scheme (RTS) provides Commonwealth-funded higher degree by research (HDR) students with an ‘entitlement’ to an exemption from course fees for the duration of an accredited HDR program. As there may be limited RTS places available, some students may be required to pay fees. The USQ Office of Research and Higher Degrees will advise students of their eligibility for an RTS place.

Program structure

The Master of Engineering involves a minimum of either three terms of full-time research or six terms of part-time research during which a candidate prepares a dissertation on the research undertaken and submits it for examination. Research topics are selected from areas of agricultural, civil, electrical, electronic, environmental, mechanical, biomedical and mechatronic engineering.

The Master of Engineering may also incorporate a small component of coursework, limited to a maximum of two unit courses, drawn from the undergraduate programs of the Faculties of Engineering and Surveying, Business and Sciences.

Required time limits

Full-time students have a maximum of 3 years to complete this program. Part-time students have a maximum of 6 years to complete this program. International students should complete this program within the CRICOS duration which is 2 years.
A pro-rata adjustment of the maximum time period will apply for those students who transfer from one mode of study to another. A pro-rata reduction in the maximum time period will apply to students who are admitted to a program with advanced standing.

Research

The key areas of research of the Faculty are:

• Agricultural and Environmental Engineering

  • Agricultural Machinery

  • Precision Agriculture

  • Biosystems

  • Ground Water

  • Waste Treatment

  • Environmental Modelling

  • Irrigation

  
  

• Computational Engineering

  • Numerical Methods and Analysis

  • Modelling and Simulation

  • Finite Elements

  
  

• Electrical, Electronic and Computer Engineering

  • Microwave Engineering

  • Signal Processing and Neural Networks

  • Computer and Network Engineering

  • Energy Systems and Control

  
  

• Fluid Mechanics, Rheology and Thermofluids

  • Aerodynamics

  • Heat and Mass Transfer

  • Flow of Polymeric Liquids

  • Thermodynamics

  
  

• GIS and Planning

  • Remote Sensing and Photogrammetry

  • Surveying and Land Planning

  • Spatial Modelling and GPS

  
  

• Mechanics, Materials and Structures

  • Fibre Composites

  • Concretes

  • Metals

  • Soil Mechanics

  • Fracture Mechanics

  
  

• Mechatronics and Control

  • Agricultural Machinery

  • Robotics

  • Smart Devices

  • Machine Vision

  • Measurement and Instrumentation.

  
  

IT requirements

Students should refer to the section entitled Access to Information Technology Facilities in the General Faculty and Program Information section of this Handbook.

Other program requirements

Students enrolling in this program by external mode will need to demonstrate that the educational objectives normally achieved by attendance on-campus are met by other means. This will normally require that:

• there is acceptable local day to day supervision

• the research project is related to their day to day work

• the student has access to adequate local facilities such as a library, laboratory and/or the technical support required to complete the research project

• communication with USQ staff is readily available via telephone, facsimile and/or email

• the USQ supervisor is able to visit the remote site as required

• the student is able to attend the USQ campus for supervision and/or seminars as directed.

Recommended enrolment pattern

The Master of Engineering is comprised of a minimum of 12 units of directed research. Students studying full-time on-campus will normally undertake eight units per year; part-time students normally enrol in four units per year. Full-time students normally enrol in a four-unit course for each term in which they undertake research activities. Part-time students normally enrol in a two-unit course for each term in which they engage in research activities.

Notes

Students must complete ENG8001 and a total of 11 units of Independent Research in Engineering and Surveying courses. ENG8001 must be satisfactorily completed during the first term of study.
Programs may be varied to suit the needs of individual students. Enrolment in the above courses is used to monitor student progress and to levy program fees where appropriate, so it is important to consult with the Associate Dean (Research) when finalising enrolment for this program. All of the above courses (except ENG8001) are ungraded courses, i.e. successful completion will be indicated by a Satisfactory Progress grade.