USQ Wireless - Manual Setup

USQ-Secure uses WPA2-AES Encryption and 802.1x authentication.  This is commonly called WPA2 - Enterprises by many wireless programs.  If you wish to configure your own software or appliance to connect to USQ-Secure you will need to follow these settings.  Please not this is for advanced users and no ICT Support provided.

SSID:  USQ-Secure
Network Type:  Infrastructure
Security Type:  WPA2-Enterprise
Encryption Type:  AES
Authentication Method (outer): PEAP
Outer identity:  Anonymous (no creditentials)
Authentication Method (inner): EAP
EAP Type:  EAP-GTC (some software combines Authentication Method (inner) and EAP Type to a field called Authentication Protocol
Username:  [Your USQ Username] (do not use USQ\username or username@usq.edu.au)
Password:  [Your USQ Password]
Domain:  [Leave Blank]