HYDRAULICS II

Year	No.	Offer	Mode	Description			Cred. Pts
96	70560 	S2  	X 	HYDRAULICS II             	1.00

Contents

• Staffing
• Pre-requisite(s)
• Synopsis
• Objectives
• Topics
• Texts
• Recommended References
• Student Workload
• Assessment Details
• Other Requirements

STAFFING:

PRE-REQUISITE(S)

70360

SYNOPSIS:

The  emphasis of this unit is the application of hydraulic  theory  to
the   solution   of  problems  commonly  encountered  in   engineering
hydraulics and to the design of hydraulic systems and structures.

The  basic  concepts of the conservation of mass, momentum and  energy
(introduced in Hydraulics I) are reviewed, extended and applied  to  a
variety  of hydraulic systems.  New material on unsteady pipeline  and
open  channel flows, loose boundary hydraulics and coastal  hydraulics
is  presented  and applied. Students are practised in the  design  and
analysis  of  open channel, pipeline and pumping systems  and  a  wide
range of hydraulic structures.

OBJECTIVES:

Upon successful completion of this unit the student should be able to :

1. evaluate and apply the equations available for the description of open channel and pipe flow;
2. solve problems involving compound and branching pipes;
3. solve simple pipe networks using an appropriate method;
4. select a pump to meet a specified duty;
5. match a pump to a pipeline system and determine the operating point of the pump;
6. determine the maximum discharge and suction lift for cavitation free operation of a pump;
7. apply rigid and elastic water hammer theory to the analysis of pipeline systems;
8. calculate the maximum allowable rates for valve open and closure;
9. design lined and erodible channels (including vegetative lined channels);
10. solve the equations governing unsteady open channel flow and apply them to the solution of practical flow problems including : . runoff on a plane surface . routing of a stream hydrograph . passage of a surge wave;
11. predict the sediment load in an open channel or natural stream;
12. design a range of hydraulic structures including : . fixed and movable crest weirs . gated control structures . pipe conveyance structures . spillways and energy dissipation structures . critical flow measuring flumes . gulley control structures . weir and culvert type structures using the minimum specific energy concept;
13. describe the essential theory of coastal and estuarine hydraulics.

TOPICS:

 Description                                                    Weighting(%)

Pipeline and pumping systems, pipe networks                           15.00

Unsteady flow in pipelines - water hammer and surge                   15.00

Unsteady free surface flow                                            20.00

Loose boundary hydraulics, stable channel design                      20.00

Hydraulic Structures                                                  20.00

Coastal hydraulics                                                    10.00

TEXT and MATERIALS to be PURCHASED:

Featherstone R E and Nalluri C, "Civil Engineering Hydraulics -
Essential Theory with Worked Examples", 2nd Ed, BSP, 1988. (Also
specified for Hydraulics I).

Approved non programmable calculator.

RECOMMENDED REFERENCE MATERIALS:

Chow V T, "Open Channel Hydraulics", McGraw Hill, 1959.

USBR, "Design of Small Canal Structures".

FAO Irrigation and Drainage Paper 26/1, 26/2, "Small Hydraulic
Structures".

Sharp B B, "Water Hammer : Problems and Solutions", Edward Arnold,
1981.

Stephenson D, "Pipeline Design for Water Engineers", Elsevier,
Development in Water Science 6, 1981.

Graf W H, "Hydraulics of Sediment Transport", McGraw Hill, 1971.

Stephenson D, Meadows M E, "Kinematic Hydrology and Modelling",
Elsevier, Developments in Water Science 26, 1986.

STUDENT WORKLOAD REQUIREMENTS:

	ACTIVITY				HOURS
Directed Study                                	100
Private Study                                 	36
Examinations                                  	3
Assessments                                   	36

ASSESSMENT DETAILS:

No	*F/S	Marks		Due		Description					Wtg(%)		LBL
1 	S 	100.00  	06/09/96	ASSIGNMENT 1                            	10.00   	Y
2 	S 	100.00  	04/10/96	ASSIGNMENT 2                            	10.00   	Y
3 	S 	100.00  	01/11/96	ASSIGNMENT 3                            	10.00   	Y
4 	S 	700.00  	END S2  	3 HOUR RESTRICTED FINAL EXAMINATION     	70.00   	N

OTHER REQUIREMENTS:

1    Students must achieve at least 45% of the maximum possible  marks
     in  each  assignment,  at least 50% of the  marks  in  the  final
     examination,  and  at least 50% of the aggregate  marks  for  all
     assessments in order to complete the unit successfully.
2    The  final  examination  in this unit is  restricted.   Only  the
     following  items  may  be  brought into the  examination  by  the
     student - an approved non programmable calculator.
3    Because  it is normal practice to release model answers  promptly
     after  the  due  date,  the penalty for late  submission  of  any
     assessment is normally the loss of all marks for the assessment.
4    There is no residential school component for this unit.
5    It  is the policy of the Faculty of Engineering and Surveying NOT
     to  accept  submission  of assignments  by  facsimile  or  email.
     Students  in remote locations who do not have regular  access  to
     postal services may be given special consideration.