USQ LogoCourse specification
The current and official versions of the course specifications are available on the web at //
Please consult the web for updates that may occur during the year.

ENG8411 Masters Engineering Research Project A

Semester 2, 2015 On-campus Toowoomba
Units : 1
Faculty or Section : Faculty of Health, Engineering and Sciences
School or Department : Faculty of Health, Engineering and Sciences

Contents on this page


Examiner: Karu Karunasena
Moderator: Ray Malpress


Pre-requisite: ENG8001

Other requisites

Recommended prior study: ENG3902 Recommended concurrent study: ENG4903. Students are expected to have satisfactory academic standing (ie GPA above 3.5) and completed 50% of their program prior to enrolling in this course.


Project work undertaken by individuals is a central part of engineering and spatial science practice. At the professional level project work routinely involves research in the sense that there are non-standard requirements to be met and non-standard problems to be overcome. This course, combined with ENG8412 Masters Dissertation C, prepares the student for professional-level technical project work. With the guidance of supervisor/s, the student will augment, integrate and demonstrate skills spanning both the technical and non-technical dimensions of engineering and spatial science at the professional level. The project (ENG8411 Masters Dissertation B immediately followed by ENG8412 Masters Dissertation C) will develop and test the ability to define and analyse the problem, to develop solutions to the problem, to make the necessary decisions, convert ideas into useful outcomes and to cope with the unexpected problems encountered in testing and evaluation. All of this must be accomplished in a tight timeframe, within resource limitations and with due regard for safety, social and ethical considerations.


The project (comprising ENG8411 Masters Dissertation B immediately followed by ENG8412 Masters Dissertation C) is intended to integrate and augment the student's total formal knowledge by means of its application to a real problem at the appropriate professional level. This course (being the first half of the project) will comprise firstly the selection, negotiation and approval of a project topic appropriate to the student's major study. Following this the student will (i) research the background, context and literature, (ii) develop an appropriate methodology, (iii) demonstrate a sound appreciation of the overall task and its constraints by formal reporting, and (iv) make substantial progress in the execution of the work.


The course objectives define the student learning outcomes for a course. On successful completion of this course, students should be able to:

  1. commence and make appropriate progress in a major technical task;
  2. find and critically review the quality and value of information from published literature and other contextual sources;
  3. identify sustainability, safety and ethical issues associated with a major technical task;
  4. define the goals, determine an appropriate methodology, a realistic schedule, and the resource requirements for the execution of a major technical task involving research;
  5. provide an appropriately structured progress report on a major technical task;
  6. establish, manage and maintain appropriate interaction and reporting with the designated supervisor during all phases of a major technical task.


Description Weighting(%)
1. Project work in which students will plan, commence and make substantial progress in an individual, generally open-ended task which will encompass a range of technical skills appropriate to the student's major study. These will include ALL of the following: literature research and evaluation; determination of consequences; and planning and self management. 30.00
2. Project work tasks will also include some (and often many) of the following: planning and management; feasibility assessment; experimental work and trialing; fieldwork; data analysis; design; prototype construction and testing; simulation and modelling; financial analysis. 40.00
3. Project work will be undertaken with the guidance of a supervisor/s appointed from the academic staff of the Faculty. Sponsors and technical advisors external to the Faculty may also be involved. 10.00
4. Report writing. 20.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (

Please contact us for alternative purchase options from USQ Bookshop. (

  • There are no texts or materials required for this course.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.

Student workload requirements

Activity Hours
Lectures 2.00
Private Study 33.00
Project Work 100.00
Report Writing 15.00
Supervisor Consultation 15.00

Assessment details

Description Marks out of Wtg (%) Due Date Notes
TOPIC ALLOCATION 1 1 29 Jul 2015 (see note 1)
PROJECT SPECIFICATION 1 1 12 Aug 2015 (see note 2)
PRELIMINARY REPORT 1 1 14 Oct 2015 (see note 3)
PROGRESS ASSESSMENT 100 100 04 Nov 2015 (see note 4)

  1. Refer to Assessment Note 2 in the Assessment Notes of the Course Specification.
  2. Refer to Assessment Note 3 in the Assessment Notes of the Course Specification.
  3. Refer to Assessment Note 4 in the Assessment Notes of the Course Specification.
  4. Refer to Assessment Note 5 in the Assessment Notes of the Course Specification. This is a supervising staff assessment of the student's progress.

Important assessment information

  1. Attendance requirements:
    Students must attend the start of semester introductory session/s and must attend project supervision meetings (normally weekly) as negotiated with or directed by their nominated supervisor/s.

  2. Requirements for students to complete each assessment item satisfactorily:
    To complete each of the assessment items satisfactorily students must meet the requirements of the item as setout in the ENG8411/8412 Project Reference Book.

  3. Penalties for late submission of required work:
    Students should refer to the Assessment Procedure (point 4.2.4)

  4. Requirements for student to be awarded a passing grade in the course:
    To be assured of a passing grade a student must FIRSTLY complete each of the four (4) assessment items satisfactorily (which will result in the temporary grade of IIP (Incomplete In Progress) being awarded for this course); and SECONDLY, in the semester immediately following, satisfactorily complete the course ENG8412 Masters Dissertation C. The passing grade awarded will then be the same for both ENG8411 and ENG8412. Students who do not complete course ENG8412 in the semester immediately following (as above) will be regraded FNC (Fail - Did Not Complete) in course ENG8411.

  5. Method used to combine assessment results to attain final grade:
    The final grade will be determined on the basis of the ENG8412 dissertation which will encompass the entire ENG8411 plus ENG8412 Research Project.

  6. Examination information:
    There is no examination in this course.

  7. Examination period when Deferred/Supplementary examinations will be held:
    Not applicable.

  8. University Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at

Assessment notes

  1. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. The following temporary grade will then be awarded IDM (Incomplete Deferred Make-up).

  2. TOPICS AND SUPERVISORS (Assessment No. 1). (i) Students who have not indicated topic preferences or made an acceptable topic proposal (as set out in the ENG8411/2 Project Reference Book) by the date indicated above will normally be dropped from the course. (ii) Both project topics and supervisors will be allocated by the examiner on the advice of one of the assistant examiners and will depend on the student's major study, staff availability for supervision and, as far as practicable, student preferences. (iii) It is the responsibility of students to maintain regular communication with the supervisors, normally weekly or as required by the supervisor/s, and to keep whatever records of progress the supervisor/s may require (eg a log book).

  3. PROJECT SPECIFICATION (Assessment No. 2). (i) An individual project specification will be developed by the student and supervisor for each project (spanning ENG8411 Masters Dissertation B and ENG8412 Masters Dissertation C), endorsed by the student, the supervisor and the assistant examiner/examiner, and lodged with the FOES Project Administrator. (ii) A revised project specification will be written during the program of the project if the work diverges significantly from the original project conception and endorsed by the student, the supervisor and assistant examiner/examiner. (iii) The project specification will be used for management and assessment purposes throughout the duration of the project, ie including course ENG8412 Masters Dissertation C.

  4. PROJECT PRELIMINARY REPORT (Assessment No. 3). (i) The Preliminary Progress Report shall be submitted in accordance with the guidelines and requirements set out in the ENG8411/8412 Project Reference Book. (ii) A Preliminary Report which is unsatisfactory, in part or as a whole, must be reworked and resubmitted until satisfactory, as directed by the Examiner. (iii) Students whose Project Preliminary Report is not satisfactory by the Progress Assessment Due Date will be graded IDM (Incomplete Deferred Make-up) or F (Fail).

  5. PROGRESS ASSESSMENT (Assessment No. 4). (i) A progress assessment will be conducted by the supervisor/s and may comprise an interview and/or a demonstration and/or a written report at the discretion of the examiner. The result of the assessment will be lodged with the FOES Project Administrator. (ii) Where the Project Specification (Assessment No. 2) has not been lodged and/or the Project Progress Report (Assessment No. 3) has not been completed to a satisfactory standard by the progress assessment date, then the progress assessment will automatically be recorded as "unsatisfactory". (iii) Students who have participated but have not made satisfactory progress in their project work will be given the temporary grade of IDM (Incomplete Deferred Makeup). (iv) Students who have not participated to the satisfaction of the Examiner will be graded F (Fail). (v) Students graded IDM will be re-assessed early in Semester 2 with regard to their eligibility to undertake their project work in ENG8412 Masters Dissertation C. Students judged to have made satisfactory progress by the make-up deadline will be regraded IIP. Students judged to have still not made satisfactory progress will be regraded F and will not be permitted to undertake course ENG8412 Masters Dissertation C. (vi) Where unsatisfactory progress is the result of factors beyond the control of the student this shall be recorded.

  6. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. //

Other requirements

  1. ENROLMENT. Students will normally undertake the project courses (ENG8411 Masters Dissertation B followed by ENG8412 Masters Dissertation C) in the same calendar year; and this is normally expected to be their final year of enrolment in their degree program.