CSC8407 Wireless and Internet Technology
|Semester 1, 2019 On-campus Toowoomba|
|Short Description:||Wireless & Internet Technology|
|Faculty or Section :||Faculty of Health, Engineering and Sciences|
|School or Department :||School of Agric, Comp and Environ Sciences|
|Student contribution band :||Band 2|
|ASCED code :||020199 - Computer Science not elsewhere|
|Grading basis :||Graded|
Examiner: Ron Addie
Pre-requisite: Students must be enrolled in one of the following Programs: MCOP or MPIT or MCOT or MCTE or MENC or MEPR or MENS or METC or MSST or MCTN
Students who have completed CSC3420 Mobile Internet Technology cannot enrol in this course.
Networks are of increasing importance in commerce, education, and culture and absorb an ever-increasing share of the national budget. This course focuses on three topics of great interest and importance at the moment: (i) quality of service in the Internet and the means by which it can be achieved; (ii) wireless communication technology as used in mobile phone networks and the 802.11 standards (also known as Wi-Fi); and (iii) optical networks, which now form the basic infrastructure of national, metropolitan, and increasingly, local access networks. These topics are at the leading edge of development of modern communication networks and an understanding of them will help to equip the student with the insights they need in a career in communications technology. Note that students who have completed CSC3420 Mobile Internet Technology may not enrol in this course.
The first topic in the course is quality of service in the Internet, with particular emphasis on AQM's such as Random Early Discard (RED), and also the DiffServ Internet standard for managing quality of service. Students will use the NS3 simulator (via the NetML system) to gain an understanding of these topics. The second topic treated is wireless communication as used in GSM and CDMA mobile phones and the 802.11 standard for wireless LANs. The third and last major topic of the course is optical networks including wave division multiplexing, design of robust networks taking into account the WDM and Optical Transport Network (OTN) network layers. The assessment for this postgraduate course consists of assignments. Note that students who have completed CSC3420 Wireless and Internet Technology may not enrol in this course.
On successful completion of this course students should be:
- aware of the range of new communication technologies and designs;
- able to analyse these technologies and design networks which make use of them;
- able to analyse the performance of networks including queuing delays, loss, and security and reliability.
|2.||Guaranteed Performance in the Internet||10.00|
|3.||Simulation of the Internet||10.00|
|5.||Orthogonal Frequency Division Multiplexing (OFDM)||10.00|
|6.||Medium Access Control||10.00|
|7.||Security for Wireless Networking||10.00|
|8.||Wave Division Multiplexing||10.00|
|9.||Reliability of WDM Networks||10.00|
|10.||Layered network design||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2019&sem=01&subject1=CSC8407)
Please contact us for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)
Student workload expectations
|Laboratory or Practical Classes||26.00|
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||100||10||07 Mar 2019|
|ASSIGNMENT 2||100||20||29 Mar 2019|
|ASSIGNMENT 3||100||25||24 Apr 2019|
|ASSIGNMENT 4||100||20||16 May 2019|
|ASSIGNMENT 5||100||25||30 May 2019|
Important assessment information
It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
Students should refer to the Assessment Procedure http://policy.usq.edu.au/documents.php?id=14749PL (point 4.2.4)
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the weighted aggregate of the marks obtained for each of the summative assessment items in the course.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
As there are no examinations in this course, there will be no deferred or supplementary examinations.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
Students may be required to provide a copy of assignment submitted for assessment purposes. Such copies should be despatched to the USQ within 24 hours of receipt of a request to do so.
In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded the temporary grade: IM (Incomplete - Make up). An IM grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time, may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination: IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
The referencing system to be used in this course is supported by the Department. Information on this referencing system and advice on how to use it can be found in the course materials.