ENG8412 Masters Engineering Research Project B
|Semester 2, 2019 On-campus Toowoomba|
|Short Description:||Masters Eng Resch Proj B|
|Faculty or Section :||Faculty of Health, Engineering and Sciences|
|School or Department :||Faculty of Health, Engineering and Sciences|
|Student contribution band :||Band 2|
|ASCED code :||039999 - EnginTech not classified|
|Grading basis :||Graded|
|Version produced :||24 March 2019|
Examiner: Andreas Nataatmadja
Recommended prior study: ENG3902; Recommended concurrent study: ENG4903
Project work undertaken by individuals is a central part of engineering and spatial science practice. At the professional engineer/spatial scientist level project work routinely involves research in the sense that there are non-standard requirements to be met and non-standard problems to be overcome. This course requires the student to complete the project commenced in ENG8411 Masters Engineering Research Project A, and to report the complete work (ENG8411 Masters Engineering Research Project A and ENG8412 Masters Engineering Research Project B together) in the form of an academic research thesis.
Following satisfactory progress in ENG8411 Masters Engineering Research Project A in the preceding semester of offer, and with the continuing guidance of supervisor/s, the student will further develop skills spanning both the technical and non-technical dimensions of engineering and spatial science at the professional level. The student will study and replicate the rationale, style and format of the academic thesis and present the total project work (comprising ENG8411 Masters Engineering Research Project A and ENG8412 Masters Engineering Research Project B) as a thesis.
The course objectives define the student learning outcomes for a course. On successful completion of this course, students should be able to:
- take responsibility for a major individual technical task and execute it to an appropriate point of completion;
- establish, manage and maintain appropriate interaction and reporting with the designated supervisor during all phases of a major technical task;
- interact appropriately with other colleagues, e.g. technical and administrative staff, as necessary in support of the project;
- cope with resource and time constraints, both foreseeable and unexpected;
- critically review research findings, define their significance and develop optimal solution/s;
- demonstrate the ability to apply intellectual rigor whilst completing a major technical task;
- ability to solve advanced engineering problems;
- prepare an academic thesis written in a clear, logical, concise and accurate professional style using standard referencing and citation conventions; and
- submit a thesis within a designated timeframe.
|1.||Project work in which students will continue and complete the individual project commenced in ENG8411 Masters Engineering Research Project A. These will include some (and often many) of the following: further literature research and evaluation; further analysis of consequences; further planning and management; feasibility assessment; experimental work and trialling; fieldwork; data analysis; design; prototype construction and testing; simulation and modelling; financial analysis.||60.00|
|2.||The work will be undertaken with the guidance of a supervisor or supervisors (appointed from the academic staff of the Faculty). Sponsors and technical advisers external to the Faculty may also be involved.||10.00|
|3.||Thesis guidance and preparation.||30.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2019&sem=02&subject1=ENG8412)
Please contact us for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)
Student workload expectations
|Lectures or Workshops||8.00|
|Description||Marks out of||Wtg (%)||Due Date||Objectives Assessed||Notes|
|PARTIAL DRAFT THESIS||1||0||11 Sep 2019||1,2,3,4,5,6,7,8||(see note 1)|
|PROJECT PERFORMANCE||100||100||24 Oct 2019||1,2,3,4,5,6,7,8,9||(see note 2)|
- Refer to Assessment Note 3 in the Assessment Notes of the Course Specification.
- Refer to Assessment Notes 4, 5 and 6 in the Assessment Notes of the Course Specification.
Important assessment information
Students must attend project supervision meetings (normally weekly) as negotiated with or directed by their nominated supervisor/s.
Requirements for students to complete each assessment item satisfactorily:
To complete each of the assessment items satisfactorily students must meet the requirements of the item as set out in the ENG8411/8412 Project Reference Book.
Penalties for late submission of required work:
Students should refer to the Assessment Procedure http://policy.usq.edu.au/documents.php?id=14749PL (point 4.2.4)
Requirements for student to be awarded a passing grade in the course:
To be awarded a passing grade in this course, together with course ENG8411 Masters Engineering Research Project A, a student must demonstrate satisfactory performance as set out in the ENG8411/2 Project Reference Book. The grade awarded will then be the same for both ENG8411 and ENG8412.
Method used to combine assessment results to attain final grade:
The final grade will be determined on the basis of the ENG8412 thesis which will encompass the entire ENG8411 plus ENG8412 Research Project.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. The following temporary grade will then be awarded IDM (Incomplete Deferred Make-up).
(i) This is a communication benchmark course and a major component of the assessment of this course will be associated with the demonstration of communication skills. (ii) The required standard of communication skills must be demonstrated in order for a passing grade to be achieved. Substandard communication (in the thesis) will result in an automatic IM (Incomplete - Make Up) grade irrespective of the quality of the technical work of the project.
PARTIAL DRAFT THESIS. (i) Students are advised to submit a substantial portion of their draft thesis direct to their supervisor/s for feedback by the date indicated (Assessment No. 1). This is a formative assessment and no result is recorded. (ii) Students submitting a substantial portion of his/her draft thesis to his/her supervisor/s AFTER the date indicated may receive only limited or zero feedback at the discretion of the supervisor/s.
DEADLINES. (i) The deadline for receipt of the thesis ("Project Performance") is 4.00pm on the day as indicated in the assessment details above. (ii) The Examiner may grant an extension of this deadline in exceptional circumstances, such as prolonged illness. To ensure equity between students only the Examiner may grant an extension. Application for such an extension must be made in writing to the Examiner and fully justified. The decision will be made with the advice of the supervisor/s. (iii) Students unable to submit, but can prove substantial progress, by this deadline ("Project Performance") must also state briefly in a letter to the Examiner why they should not be graded F (Fail) at this time. If the reasons given are considered satisfactory, and with the advice of the principal supervisor, then a grade of IM (Incomplete-Make Up) will be awarded. (iv) Projects graded IM for any reason will normally be eligible for a C grade only. (v) The FINAL DEADLINE for project submission is one month after the submission deadline for the current semester. Projects not submitted by this final deadline will be automatically graded F (Fail).
THESIS SUBMISSION. (i) Thesis submission shall be in both electronic and printed form with the physical format for each as follows (and with contents as detailed in the ENG8411/8412 Project Reference Book). A thesis which does not meet the obligatory requirements of this format will not normally be accepted. (ii) The electronic form for the complete thesis will normally be a single file in PDF (Adobe Portable Document Format) on a read-only compact disk (CD-R) and TWO (2) identical CDs are required. (iii) The printed copy (for assessment purposes) of the complete thesis will be at least comb- or spiral-bound and be identical in content to the PDF file. TWO(2) identical copies are required.
PROJECT ASSESSMENT. (i) Assessment of the complete project, ENG8411 together with ENG8412, and project thesis shall be with respect to the final version of the individual Project Specification (course ENG8411 Masters Engineering Research Project A) and will take into account the degree of difficulty of the work. (ii) Students will not be penalized for unforeseeable events, constraints and other limitations which occur during the execution of the project. (iii) Project assessment may also involve demonstration of hardware constructed, software written and/or inspection of fieldwork as appropriate. (iv) At least two (2) members of academic staff shall perform a detailed assessment in accordance with the protocol set out in the ENG8411/8412 Project Reference Book. (v) The grade recommended by the assessors will remain confidential until various moderation procedures have been conducted by the Examiner. (vi) When a passing or F grade is awarded that grade will also be recorded for ENG8411 Masters Engineering Research Project A.
Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing
ENROLMENT. (i) A student will not be permitted to undertake ENG8412 Masters Engineering Research Project B unless he/she has a current grade of IIP (Incomplete in Progress) in ENG8411 Masters Engineering Research Project A. (ii) Students will normally undertake ENG8412 Masters Engineering Research Project B in the semester of the same year immediately following their completion of ENG8411 Masters Engineering Research Project A. (iii) Simultaneous enrolment in ENG4903 Professional Practice 2 (which encompasses project presentation, including seminars) is expected.
REGULATIONS. The notes and requirements set out in this course specification, together with those of ENG8411 Masters Engineering Research Project A Course Specification, constitute the regulations for postgraduate project work within the Faculty of Engineering and Surveying.
LIMITATIONS OF USE OF PROJECT WORK. (a) The Council of the University of Southern Queensland, its Faculty of Engineering and Surveying, and the staff of the University of Southern Queensland, do not accept any responsibility for the truth, accuracy or completeness of material contained within or associated with this thesis. (b) Persons using all or any part of this material do so at their own risk, and not at the risk of the Council of the University of Southern Queensland, its Faculty of Engineering and Surveying or the staff of the University of Southern Queensland. (c) This thesis reports an educational exercise and has no purpose or validity beyond this exercise. The sole purpose of the courses entitled "Masters Thesis" is to contribute to the overall education within the student's chosen degree program. This document, the associated hardware, software, drawings, and other material set out in the associated appendices should not be used for any other purpose: if they are so used, it is entirely at the risk of the user.