MEC2902 Mechanical Practice 2
|Semester 1, 2019 On-campus Springfield|
|Short Description:||Mechanical Practice 2|
|Faculty or Section :||Faculty of Health, Engineering and Sciences|
|School or Department :||School of Mechanical and Electrical Engineering|
|Student contribution band :||Band 2|
|ASCED code :||030701 - Mechanical Engineering|
|Grading basis :||Pass/Not Pass|
|Version produced :||20 May 2019|
Examiner: Chris Snook
The successful practice of the profession of Mechanical Engineering requires an ability to analyse engineering systems and an ability to synthesise new designs. Much of the students work in other courses develops these analytical skills. In addition, the engineer must be able to assess a complex situation, identify the critical elements and develop a workable, cost effective solution. All of this requires considerable self-confidence, and the ability to work with and lead teams. In this course the synthesis of new ideas is developed whilst the student participates in a team-based design and build activity.
This course falls naturally into three parts:
Part One consists of a design activity where a small team of students develop a design concept and specification for a device capable of satisfying a broadly specified task.
Part Two comprises the procurement of appropriate resources and the design and construction of the device in accord with the design specification developed in Part One.
Part Three covers the testing of the device and encourages the student to reflect on the activities and outcomes of the work conducted in Part One and Part Two above.
This course contains a mandatory residential school for external students and mandatory on-campus laboratories or practical classes for on-campus students.
The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:
- interpret a task specification or regulatory document;
- develop design concepts in accordance with a generic requirement;
- apply, as appropriate to the design, the operation and construction features of a range of common mechanical devices;
- co-operate in a teamwork environment;
- identify and explain critical elements in practical situations and propose solutions;
- conduct a simple product development from initial specification to prototype stage;
- observe safety procedures in a workshop environment; and
- appraise the performance of a simple mechanical device constructed by the student as part of a team.
|1.||Part One - Design Specification||20.00|
|2.||Part Two - Design and Construct Activity||60.00|
|3.||Part Three - Reflection and Evaluation||20.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2019&sem=01&subject1=MEC2902)
Please contact us for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)
(or any equivalent engineering handbook.)
Student workload expectations
|Laboratory or Practical Classes||45.00|
|Description||Marks out of||Wtg (%)||Due Date||Objectives Assessed||Notes|
|Participation||200||20||12 Mar 2019||1,2,3,4,5,6,7,8|
|Group Report||600||60||04 Jun 2019||2,3,4,5,6,7|
|Laboratory Report||200||20||07 Jun 2019||5,8|
Important assessment information
External students must attend the mandatory residential school and on-campus students must attend the mandatory on-campus laboratories or practical classes. It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration. Students must attend and complete the requirements of the Workplace Health and Safety training program for this course before they are able to undertake any practical work in the mechanical laboratories.
Requirements for students to complete each assessment item satisfactorily:
To satisfactorily complete the Participation and Attendance assessment item students must achieve a mark of 1 out of 1. To satisfactorily complete any other individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Refer to Statement 4 below for the requirements to receive a passing grade in this course.
Penalties for late submission of required work:
Students should refer to the Assessment Procedure http://policy.usq.edu.au/documents.php?id=14749PL (point 4.2.4)
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade students must attend and participate in the mandatory residential school or practical classes (achieve a mark of at least 80% for the Participation assessment item), and achieve at least 50% of the overall weighted marks for the course.
Method used to combine assessment results to attain final grade:
As P is the only passing grade available for this course, all students who are qualified for a passing grade, under the requirements in 4 above, will be given a grade of P. Other students will be given either a Failing grade or an Incomplete grade.
There is no examination in this course.
Examination period when Deferred/Supplementary examinations will be held:
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
Students must familiarise themselves with the USQ Assessment Procedures (http://policy.usq.edu.au/documents.php?id=14749PL).
2. Referencing in Assignments must comply with the Harvard (AGPS) referencing system. This system should be used by students to format details of the information sources they have cited in their work. The Harvard (APGS) style to be used is defined by the USQ library?s referencing guide. These policies can be found at http://www.usq.edu.au/library/referencing
As part of the mandatory residential school, students may be expected to undertake a combination of lectures, tutorials, laboratories, practical classes and assessment as advised by the course examiner.