|Semester 2, 2021 On-campus Toowoomba|
|Short Description:||Switching, Wireles & WAN Techn|
|Faculty or Section :||Faculty of Health, Engineering and Sciences|
|School or Department :||School of Sciences|
|Student contribution band :||Band 2|
|ASCED code :||020113 - Networks and Communications|
|Grading basis :||Graded|
|Version produced :||11 April 2021|
Examiner: David Lai
Pre-requisite: CSC3407 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
Students who do not meet the pre-requisite requirements must obtain approval of the examiner and the program coordinator to be enrolled in this course.
Students who have enrolled in or completed CSC8527 Scaling and Connecting Networks cannot enrol in this course.
Switches and routers are the basic hardware components of local area networks (LANs) and wide area networks (WANs). Furthermore, LANs are inter-connected by WANs which use different technologies from the LANs. An understanding of the basic concepts and operations for switches, routers and WAN technologies is a pre-requisite for all network professionals. This course focuses on basic concepts of switches and virtual LANs; wireless LANs; wireless routers; and various WAN technologies including Frame Relay and enterprise network security. This course covers the second part of the contents for Cisco Certified Network Associate (CCNA) (Teach by Technology strand): Switched Networks and Connecting Networks modules offered by the Cisco Networking Academy Program.
This course introduces virtual LANs as a tool to provide segmentation, flexibility and security of LANs. Link redundancy and aggregation are introduced to enhance the robustness of LANs. Network Address Translation is discussed as a method to conserve Internet Protocol Version 4 (ipv4) network address space. It also focuses on WAN technologies which span large geographic areas. After completion of this course, the students will be able to describe and select appropriate WAN technologies; handle switches; routers and wireless routers with confidence.
On successful completion of this course students will be able to:
- Design, implement and maintain LANs using switches;
- Apply Virtual LANS and layer 3 switching to corporate networks;
- Analyse and apply different dynamic routing protocols to networks;
- Explain the differences of technologies between a WAN and a LAN;
- Compare and apply security measures to a network;
- Explain cloud computing and virtualization for evolving networks.
|1.||Design and technologies of LANs (Objective 1)||10.00|
|2.||Layer 3 switching and Virtual LANs (VLANs) (Objective 2)||15.00|
|3.||Wireless LAN technologies (Objective 1)||15.00|
|4.||Dynamic routing protocols (Objective 3)||20.00|
|5.||Technologies of WANs (Objective 4)||10.00|
|6.||Network security (Objective 5)||20.00|
|7.||Cloud computing and network automation (Objective 6)||10.00|
Text and materials required to be purchased or accessed
ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2021&sem=02&subject1=CSC3427)
Please contact us for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)
(ISBN-10: 0-13-663432-X ISBN-13: 978-0-13-663432-4 eBook also available.)
(ISBN-10: 0-13-672935-5 ISBN-13: 978-0-13-672935-8 eBook also available.)
(ISBN-10: 1-58713-432-2; ISBN-13: 978-1-58713-432-6 eBook also available: ISBN-10: 0-13-476088-3,; ISBN-13: 978-0-13-476088-9.)
(ISBN-10: 1-58713-434-9; ISBN-13: 978-1-58713-434-0 eBook also available: ISBN-10: 0-13-476089-1; ISBN-13: 978-0-13-476089-6.)
Student workload expectations
|Laboratory or Practical Classes||39.00|
|Description||Marks out of||Wtg (%)||Due Date||Notes|
|ASSIGNMENT 1||100||25||16 Aug 2021|
|ASSIGNMENT 2||100||25||20 Sep 2021|
|2 HOUR CLOSED EXAMINATION||100||50||End S2||(see note 1)|
- Examination dates will be available during the semester. Please refer to the examination timetable when published.
Important assessment information
It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
Requirements for students to complete each assessment item satisfactorily:
To complete each of the assessment items satisfactorily, students must obtain at least 50% of the marks available.
Penalties for late submission of required work:
Students should refer to the Assessment Procedure http://policy.usq.edu.au/documents.php?id=14749PL (point 4.2.4).
Requirements for student to be awarded a passing grade in the course:
To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course.
Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.
To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure http://policy.usq.edu.au/documents/14749PL (point 4.4.2).
Method used to combine assessment results to attain final grade:
The final grades for students will be assigned on the basis of the aggregate of the weighted marks obtained for each of the summative assessment items in the course.
Candidates are only allowed to access specific materials during a Restricted Examination. The only materials that candidates may use in the restricted examination for this course are:
i. writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination);
ii. calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination).
Examination period when Deferred/Supplementary examinations will be held:
Any Deferred or Supplementary examinations for this course will be held during the next examination period.
University Student Policies:
Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.
1. Students must familiarise themselves with the USQ Assessment Procedures (http://policy.usq.edu.au/documents.php?id=14749PL)
2. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment irrespective of holidays. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
3. This course will NOT accept hardcopy submission of assignments unless expressly requested by the course examiner This course will NOT accept submission of assignments by facsimile unless expressly requested by the course examiner.
4. This course will NOT accept submission of assignments by facsimile unless expressly requested by the course examiner.
5. The referencing system to be used in this course is supported by the School. Information on this referencing system and advice on how to use it can be found in the course materials.
Students will require access to the Internet and an e-mail system.
Students must check the course website on a weekly basis during the teaching semester.