USQ Logo
The current and official versions of the course specifications are available on the web at https://www.usq.edu.au/course/specification/current.
Please consult the web for updates that may occur during the year.

ENV3104 Hydraulics II

Semester 1, 2021 On-campus Springfield
Short Description: Hydraulics II
Units : 1
Faculty or Section : Faculty of Health, Engineering and Sciences
School or Department : School of Civil Engineering and Surveying
Student contribution band : Band 2
ASCED code : 030999 - Civil Engineering n.e.c.
Grading basis : Graded

Staffing

Examiner: Kamrun Nahar

Requisites

Pre-requisite: ENV1101 or ENV2103 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS

Other requisites

Recommended prior study or concurrent study: ENG3103 or ENG3104.

Synopsis

The emphasis of this course is the application of hydraulic theory to the solution of problems commonly encountered in engineering hydraulics and to the design of hydraulic systems and structures. The basic concepts of the conservation of mass, momentum and energy (introduced in Hydraulics I) are reviewed, extended and applied to a variety of hydraulic systems. New material on unsteady pipeline and open channel flows, loose boundary hydraulics and coastal hydraulics is presented and applied. Students are practised in the design and analysis of open channel, pipeline and pumping systems and a wide range of hydraulic structures.

Objectives

The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:

  1. evaluate and apply the equations available for the description of open channel and pipe flow; 1. derive and apply the equations governing rapidly varied unsteady channel flow including surge waves;
  2. solve the equations governing both steady and unsteady gradually varied channel flow and apply them to the solution of practical flow problems including: backwater profiles; runoff on a plane surface and routing of a stream hydrograph; design erodible and vegetative lined channels;
  3. solve simple pipe networks using an appropriate method;
  4. apply rigid column theory to unsteady pipeline flow to analyse mass oscillations in pipelines and calculate maximum allowable rates for valve opening and closure;
  5. apply rigid and elastic water hammer theory to pipeline systems;
  6. design a range of hydraulic structures including: fixed and movable crest weirs; gated control structures; pipe conveyance structures; spillways and energy dissipation structure; critical flow measuring flumes; gulley control structures ; weir and culvert type structures using the minimum specific energy concept;
  7. undertake a dimensional analysis of a physical system incorporating many variables; design a model of a hydraulic system using Reynolds or Froude scaling.

Topics

Description Weighting(%)
1. Pipeline and pumping systems, pipe networks 20.00
2. Unsteady flow in pipelines - water hammer and surge 20.00
3. Unsteady free surface flow 20.00
4. Loose boundary hydraulics, stable channel design 20.00
5. Hydraulic Structures 12.00
6. Dimensional analysis and hydraulic similitude 8.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from USQ's Online Bookshop (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2021&sem=01&subject1=ENV3104)

Please contact us for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)

Marriott, M 2016, Nalluri & Featherstone's civil engineering hydraulics: essential theory with worked examples, 6th edn, Wiley Blackwell, Oxford.
A scientific calculator which is non-programmable, that does not hold textual information and cannot display graphs.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.
Chadwick, AJ, Morfett, JC & Borthwick, M 2013, Hydraulics in civil and environmental engineering, 5th edn, RC Press, Taylor and Francis Group, Boca Raton, FL.

Student workload expectations

Activity Hours
Assessments 40.00
Directed Study 24.00
Examinations 2.00
Lectures 26.00
Private Study 37.00
Tutorials 26.00

Assessment details

Description Marks out of Wtg (%) Due Date Notes
Assignment 1 200 20 22 Apr 2021
Assignment 2 200 20 20 May 2021
Open Examination - Online 600 60 End S1 (see note 1)

Notes
  1. This will be an online exam. Students will be provided further instruction regarding the exam by their course examiner via StudyDesk. The examination date will be available via UConnect when the Alternate Assessment Schedule has been released.

Important assessment information

  1. Attendance requirements:
    It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

  2. Requirements for students to complete each assessment item satisfactorily:
    To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.

  3. Penalties for late submission of required work:
    Students should refer to the Assessment Procedure http://policy.usq.edu.au/documents.php?id=14749PL (point 4.2.4)

  4. Requirements for student to be awarded a passing grade in the course:
    Due to COVID-19 the requirements for S1 2021 are:
    To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.

    Requirements after S1 2021:
    To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course (i.e. the Primary Hurdle), and have satisfied the Secondary Hurdle (Supervised), i.e. the end of semester examination by achieving at least 40% of the weighted marks available for that assessment item.

    Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items and has passed the Primary Hurdle but failed to satisfy the Secondary Hurdle (Supervised), or has satisfied the Secondary Hurdle (Supervised) but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.

    To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure http://policy.usq.edu.au/documents/14749PL (point 4.4.2).

  5. Method used to combine assessment results to attain final grade:
    The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.

  6. Examination information:
    Due to COVID-19 the requirements for S1 2021 are:
    An Open Examination is one in which candidates may have access to any printed or written material and a calculator during the examination.

    Requirements after S1 2021:
    In a Restricted Examination, candidates are allowed access to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); a scientific calculator which is non-programmable, that does not hold textual information and cannot display graphs. (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination).

  7. Examination period when Deferred/Supplementary examinations will be held:
    Normally Deferred and Supplementary Examinations are held in the next Examination period. In S1 2021 selected courses will pilot an early Deferred and Supplementary Examination period held within 30 business days of results release. The list of courses involved can be found at https://cmsauth.usq.edu.au/current-students/academic/exams/supplementary-and-deferred-assessment.

  8. University Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene University policies and practices. These policies can be found at http://policy.usq.edu.au.

Assessment notes

  1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.

  2. Students must retain a copy of each item submitted for assessment. This must be produced within 24 hours if required by the Examiner.

  3. In accordance with University Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.

  4. If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ Study Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ Study Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).

  5. If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.

  6. The Faculty will NOT normally accept submission of assessments by facsimile or email.

  7. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.

  8. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.

  9. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).

  10. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide. http://www.usq.edu.au/library/referencing

Other requirements

  1. Students will require access to e-mail and internet access to UConnect for this course.

Date printed 18 June 2021