Skip to main content

Associate Degree of Engineering (ADNG) - AssocDegEng

QTAC code (Australian and New Zealand applicants): Springfield campus: 927052; External: 907055; Toowoomba campus: 907052

CRICOS code (International applicants): 054271G

 On-campusExternal*#
Semester intake:Semester 1 (February)
Semester 2 (July)
Semester 1 (February)
Semester 2 (July)
Semester 3 (November)
Campus:Springfield, Toowoomba -
Fees:Commonwealth supported place
Domestic full fee paying place
International full fee paying place
Commonwealth supported place
Domestic full fee paying place
International full fee paying place
Standard duration:2 years full-time, 4 years part-time or external 
Program articulation:

From: Foundation Diploma of University Studies (Engineering or Spatial Science specialisation)

To: Bachelor of Engineering Science; Bachelor of Engineering (Honours)

Notes

The Civil, Electrical and Electronic and Mechanical Engineering majors are the only majors available on-campus at Springfield.
The Instrumentation Control and Automation Engineering major is only available part-time.

Footnotes
*External students must be able to attend mandatory and highly recommended residential schools at a USQ campus.
#The semester 3 intake is only available via external study.

Back to top

Contact us

Future Australian and New Zealand students  Future International students  Current students 
Ask a question
Freecall (within Australia): 1800 269 500
Phone (from outside Australia): +61 7 4631 5315
Email: studyeng@usq.edu.au  
Ask a question
Phone: +61 7 4631 5543
Email: international@usq.edu.au 
Ask a question
Freecall (within Australia): 1800 007 252
Phone (from outside Australia): +61 7 4631 2285
Email usq.support@usq.edu.au 

Back to top

Professional accreditation

All majors (except Agricultural, Instrumentation Control and Automation Engineering, and Mining Engineering) in this program have received full accreditation from Engineers Australia. Provisional accreditation has been granted for the Agricultural, Instrumentation Control and Automation Engineering, and Mining Engineering majors. Graduates of this program are eligible to apply for membership of Engineers Australia as an Engineering Associate (Officer). After further professional development, a graduate member with an Associate Degree may apply for chartered status as an Engineering Officer and, when granted, may use the post-nominal AMIEAust CEngO.

Graduates of this program in the Mining Engineering major are eligible to apply for Associate Grade membership of AusIMM (Australasian Institute of Mining and Metallurgy).

Back to top

Program aims

The Associate Degree of Engineering is a tertiary level program designed to educate engineering associates in the theory, methods and practices necessary to support professional engineers. It is also designed so that students are eligible for membership of Engineers Australia (as an Engineering Associate) and other appropriate professional bodies. To this end, the program is designed to provide a general understanding of a broad field of knowledge, with specified electives (approved courses) available in most majors in the final stages of the program to allow a measure of specialisation.

Back to top

Program objectives

Upon successful completion of the degree, students should be able to:

  1. Display broad knowledge that underpins relevant engineering practice.

  2. Identify the social purpose of engineering and the relationship between human-made products and systems, and community needs.

  3. Apply established tools and techniques to solve a range of well-defined engineering problems in diverse environmental, technical and social contexts.

  4. Apply relevant management and design procedures to contribute to the delivery of engineering projects within given constraints.

  5. Make guided judgements when identifying and responding to cultural, ethical and social issues, including those relevant to indigenous peoples.

  6. Communicate effectively in English using oral, written and technology-based approaches; and apply effective competencies as a team member and individual within the practice domain.

  7. Engage in lifelong learning through reflection, and be accountable for their personal and professional actions by managing personal performance.


Back to top

Australian Qualifications Framework

The Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualifications offered by higher education institutions (including universities), vocational education and training institutions and secondary schools. Each AQF qualification has a set of descriptors which define the type and complexity of knowledge, skills and application of knowledge and skills that a graduate who has been awarded that qualification has attained, and the typical volume of learning associated with that qualification type.

This program is at AQF Qualification Level 06. Graduates at this level will have broad knowledge and skills for paraprofessional/highly skilled work and/or further learning.

The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.

Back to top

Program Information Set

View USQ’s admission criteria, student profiles and a summary of all offers made under Course Admission Information Set via the QTAC website.

Back to top

Admission requirements

To be eligible for admission, applicants must satisfy the following requirements:

  • Have achieved a minimum Overall Position (OP) 16, tertiary entrance rank 66 or equivalent qualification.^
  • Subject Pre-requisite: English (4,SA) and Mathematics A (4, SA) or equivalent.

  • English Language Proficiency requirements for Category 2.


Applicants are advised to also note the following:

  • Recommended Prior Study: Mathematics B (4, SA) or equivalent.


All students are required to satisfy the applicable English language requirements.

If students do not meet the English language requirements they may apply to study a University-approved English language program. On successful completion of the English language program, students may be admitted to an award program.

^

These are determined by the University for specific programs each Semester. The 2019 OP and tertiary entrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or equivalent level, tertiary, preparatory, professional or vocational qualifications or work experience, as detailed in the QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.

Special admissions may help you get into the program of your choice by increasing your Selection Rank. The additional points don't apply to all applicants or all programs. Please read the information about USQ's Special Admissions carefully to find out what you may be eligible for.

Back to top

Program fees

Commonwealth supported place

A Commonwealth supported place is where the Australian Government makes a contribution towards the cost of a students' higher education and students pay a student contribution amount, which varies depending on the courses undertaken. Students are able to calculate the fees for a particular course via the Course Fee Finder.

Commonwealth Supported students may be eligible to defer their fees through a Government loan called HECS-HELP.

Domestic full fee paying place

Domestic full fee paying places are funded entirely through the full fees paid by the student. Full fees vary depending on the courses that are taken. Students are able to calculate the fees for a particular course via the Course Fee Finder.

Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.

Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealand citizens who will be resident outside Australia for the duration of their program pay full tuition fees and are not eligible for FEE-Help.

International full fee paying place

International students pay full fees. Full fees vary depending on the courses that are taken and whether they are studied on-campus, via distance education/online. Students are able to calculate the fees for a particular course via the Course Fee Finder.

Back to top

Program structure

The Associate Degree of Engineering is a 16-unit program consisting of Academic Courses and Practice Courses. Students undertake a major of study, including approved courses which students are able to select.

Academic courses are normally one-unit courses and involve approximately 155 hours of student work per unit.

Practice courses are zero unit courses and each involves approximately 50 hours of student work.

Back to top

Required time limits

Students have a maximum of 6 years to complete this program.

Back to top

Core courses

The courses that comprise the core studies program are shown in the following table:

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
ENG1002 Introduction to Engineering and Built Environment Applications  1,2  1,2    1,2 
ENG1003 Problem Solving in Engineering and the Built Environment    1,2 
ENG1100 Introduction to Engineering Design  1,2  1,2    1,2 
ENG2111 Engineering Associate Degree Design Project   
ENM1500 Introductory Engineering Mathematics  1,2  1,2    1,2,3 
Practice Courses 
ENG1901 Engineering Practice 1  1,2  2,3   
ENG2909 Work Experience - Associate        1,2 

Back to top

Major studies

The Associate Degree of Engineering consists of a core component and a series of major studies. All students must complete the core courses and one of the major studies. The major study provides students with knowledge and skills in a specific discipline. The major study areas in the USQ Associate Degree of Engineering are listed below. The Instrumentation Control and Automation Engineering major is designed for process technologists in industry who wish to upgrade their qualifications. As such, the program will normally be undertaken by external study.

Major  On-Campus  External 
Agricultural Engineering  Yes  Yes 
Civil Engineering  Yes  Yes 
Computer Systems Engineering  Yes  Yes 
Electrical and Electronic Engineering  Yes  Yes 
Environmental Engineering  Yes  Yes 
Instrumentation Control and Automation Engineering  No  Yes 
Mechanical Engineering  Yes  Yes 
Mining Engineering  Yes  Yes 
Power Engineering  Yes  Yes 

Specific majors

In this section:

Back to top

Agricultural Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
AGR2301 Agricultural Science     
AGR2302 Agricultural Machinery     
CIV1500 Applied Mechanics    1,3 
CIV1501 Engineering Statics    2,3 
CIV2403 Geology and Geomechanics   
ENV2103 Hydraulics I     
ENV3105 Hydrology     
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
SVY1500 Spatial Science for Engineers   
Approved courses (x2)         
Practice Courses 
AGR2902 Field Practice       
CIV2901 Geology and Geomechanics Practice  2,3   
ENV2902 Hydraulics Practice  1,2,3   

Back to top

Civil Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
CIV1500 Applied Mechanics    1,3 
CIV1501 Engineering Statics    2,3 
CIV2403 Geology and Geomechanics   
CIV2502 Structural and Building Technology   
CIV2605 Construction Engineering   
CIV2701 Road Design and Location   
CIV2702 Municipal Services   
ENV2103 Hydraulics I   
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
SVY1500 Spatial Science for Engineers   
Approved course (x1)         
Practice Courses 
CIV2901 Geology and Geomechanics Practice  2,3   
CIV3906 Civil Materials Practice   
ENV2902 Hydraulics Practice  1,2,3   

Back to top

Computer Systems Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
CSC1401 Foundation Programming  1,2  1,2    1,2,3 
CSC2402 Object-Oriented Programming in C++     
ELE1301 Computer Engineering   
ELE1502 Electronic Circuits   
ELE1801 Electrical Technology    2,3 
ELE2101 Control and Instrumentation   
ELE2303 Embedded Systems Design   
ELE2501 Electronic Workshop and Production   
MAT1101 Discrete Mathematics for Computing   
Approved Courses (x2)         
Practice Courses 
ELE1911 Electrical and Electronic Practice A   
ELE2912 Electrical and Electronic Practice B   
ELE2913 Electrical and Electronic Practice C       

Back to top

Electrical and Electronic Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
ELE1301 Computer Engineering   
ELE1502 Electronic Circuits   
ELE1801 Electrical Technology    2,3 
ELE2101 Control and Instrumentation   
ELE2501 Electronic Workshop and Production   
ELE2503 Electronic Systems   
ELE2601 Telecommunications Principles     
ELE2702 Electrical Measurement and Analysis     
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
Approved Courses (x2)         
Practice Courses 
ELE1911 Electrical and Electronic Practice A   
ELE2912 Electrical and Electronic Practice B   
ELE2913 Electrical and Electronic Practice C       

Back to top

Environmental Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
BIO1100 Biology Concepts       
CIV1500 Applied Mechanics    1,3 
CIV2403 Geology and Geomechanics   
ENV2103 Hydraulics I   
ENV2105 Applied Chemistry and Microbiology     
ENV2201 Land Studies   
ENV3105 Hydrology   
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
SVY1500 Spatial Science for Engineers   
Approved courses (x2)         
Practice Courses 
AGR2902 Field Practice       
CIV2901 Geology and Geomechanics Practice  2,3   
ENV2902 Hydraulics Practice  1,2,3   

Back to top

Instrumentation Control and Automation Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
CIV1500 Applied Mechanics    1,3 
ELE1301 Computer Engineering   
ELE1502 Electronic Circuits   
ELE1801 Electrical Technology    2,3 
ELE2101 Control and Instrumentation   
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
MEC1501 Introduction to Industrial Processes       
MEC2106 Introduction to Thermofluids   
MEC2501 Process Control Systems       
Approved Courses (x2)         
Practice Courses 
ELE1911 Electrical and Electronic Practice A   
MEC2901 Mechanical Practice 1   

Back to top

Mechanical Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
CIV1500 Applied Mechanics    1,3 
CIV1501 Engineering Statics    2,3 
ELE1801 Electrical Technology    2,3 
ENM1600 Engineering Mathematics  1,2  1,2    1,2 
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
MEC2106 Introduction to Thermofluids   
MEC2202 Manufacturing Processes   
MEC2301 Design of Machine Elements   
MEC2402 Stress Analysis   
MEC2405 Machine Dynamics   
Approved Course (x1)         
Practice Courses 
MEC2901 Mechanical Practice 1   
MEC2902 Mechanical Practice 2     
MEC3903 Mechanical Practice 3     

Back to top

Mining Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
CIV1500 Applied Mechanics    1,3 
CIV1501 Engineering Statics    2,3 
CIV2403 Geology and Geomechanics   
CIV2605 Construction Engineering   
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
MIN2001 Mining Technology and Mineral Processing     
MIN2002 Mine Planning and Design     
MIN2003 Mine Operations and Management     
SVY1500 Spatial Science for Engineers   
Approved courses (x2)         
Practice Courses 
CIV2901 Geology and Geomechanics Practice  2,3   
MIN2901 Mining Practice*       

Footnotes
*offered in Semester 3 in odd years only e.g. 2019, 2021 etc

Back to top

Power Engineering major courses

Courses  Semester(s) Offered 
Toowoomba  Springfield  External  Online 
Academic Courses 
ELE1301 Computer Engineering   
ELE1502 Electronic Circuits   
ELE1801 Electrical Technology    2,3 
ELE2101 Control and Instrumentation   
ELE2501 Electronic Workshop and Production   
ELE2503 Electronic Systems   
ELE2702 Electrical Measurement and Analysis     
MEC1201 Engineering Materials  1,2  1,2    1,2,3 
Approved Courses (x3)         
Practice Courses 
ELE1911 Electrical and Electronic Practice A   
ELE2912 Electrical and Electronic Practice B   
ELE2913 Electrical and Electronic Practice C       

Back to top

Practical experience

To be eligible to graduate from the Associate Degree of Engineering, students must obtain an aggregate of at least 30 days of suitable work experience during their program. This experience may be in an engineering office or laboratory where the student would be working principally with professional engineers and engineering associates. It may, however, be preferable for students to spend some time in field or factory activities to gain insight into industrial practice and to see what is involved in converting designs into finished products. Students are required to enrol in ENG2909 Work Experience - Associate in the latter part of their program and keep a record of appropriate experience as specified in the Course Specification. The work experience is to be endorsed by an appropriate person in the organisation providing the experience and submitted to the examiner. The student must meet all costs associated with the acquisition of work experience to satisfy this requirement. The record of work experience must be made available for perusal by the Faculty of Health, Engineering and Sciences upon request. The acceptability or otherwise of employment experience, and the period of that type of experience that may be credited towards the 30 days, will be determined by the Examiner of ENG2909 Work Experience - Associate .

Credit or exemptions for ENG2909 Work Experience - Associate will not normally be considered.

Back to top

IT requirements

Access to an up-to-date computer is necessary. On-campus students can access appropriately equipped laboratories, but should consider acquisition of their own computer. External students should be able to access a computer with the following minimum standards as advised by the University. All students should have access to email and the Internet via a computer running the latest versions of Internet web browsers such as Internet Explorer or Firefox. The University has a wireless network for on-campus students' computers. In order to take advantage of this facility and further enhance their on-campus learning environment, students should consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software is required for some courses.

Back to top

Residential schools

The attendance requirement of residential schools within this degree is indicated by the following letters: V = Voluntary; O = Optional; C = Compulsory; R = Recommended; HR = Highly Recommended; M = Mandatory. Find out more about residential schools, visit the Residential School Schedule to view specific dates for your degree, or visit the Policy and Procedure Library.

Students are required to undertake practical and professional activities relevant to their program through enrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may be undertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only. They are a compulsory part of the program and do not attract a student contribution charge for Australian residents or a tuition fee for international students. The recommended enrolment schedule for Practice courses is shown in the Recommended Enrolment Pattern for the program in this Handbook.

External students must attend a number of residential schools during their program to obtain experience in practical and professional activities appropriate to the program. The residential schools are included in Practice courses which are conducted in Semester 3 or during the mid-semester recess periods. The dates for each residential school Practice course are shown in the Residential School schedule in this Handbook and external students should ensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protective equipment is compulsory in many engineering, construction and spatial science laboratories. Students should confirm the requirements before attending residential schools for Practice courses.

Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activities and/or attend a compulsory residential school.

Agricultural Engineering


Civil Engineering


Computer Systems Engineering


Electrical and Electronic Engineering


Environmental Engineering


Instrumentation Control and Automation Engineering


Mechanical Engineering


Mining Engineering


Power Engineering


Back to top

Exit points

Students who, for whatever reason, are unable to complete the Associate Degree of Engineering, and who satisfy all of the requirements of the Diploma of Engineering Studies may be permitted to exit with that award.

Back to top

Credit

Applications for exemptions/credit will be assessed and based upon the USQ Credit and Exemption Procedure.

Work Experience

Work and industrial experience that has not been formally assessed, does not normally qualify for course credit in the Associate Degree of Engineering program. Existing work experience may be used to satisfy the practical/work experience requirements when completing the ENG2909 Work Experience - Associate practice course.

Back to top

Other information

The Faculty of Health, Engineering and Sciences may permit a student to enrol in an approved course other than those listed for the accredited program. Students who wish to enrol in approved courses other than those listed, must obtain written approval from the Program Coordinator prior to enrolling in the course.

To satisfy the requirements of the program students must complete all of the Academic courses and the Practice courses in the following tables that show the recommended enrolment patterns for on-campus and external students. Students following a non-standard enrolment pattern should consult the course specification to ascertain if a course is offered in another term.

Engineering Pathways

A special Pathway has been developed for students who intend to study the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) once they have completed the Associate Degree of Engineering program. Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) maximises the advanced standing (exemptions) students will receive in these programs. A Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) has been developed for each of the following Associate Degree of Engineering majors into the equivalent major:

  • Agricultural Engineering

  • Civil Engineering

  • Computer Systems Engineering

  • Electrical and Electronic Engineering

  • Environmental Engineering

  • Mechanical Engineering

  • Power Engineering


Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours) has been specially developed for students who study part-time. Full-time students may seek approval to follow the Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours), but it is not timetabled for on-campus students.

Students must have the approval of the Faculty of Health, Engineering and Sciences to undertake the Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours). Students are strongly advised to consider and apply for approval for this Pathway as soon as possible in order to maximise the credit they will receive in the Bachelor of Engineering Science or the Bachelor of Engineering (Honours). This should be done prior to the commencement of the second year of studies if possible, and after successful completion of at least eight (8) academic courses in the Associate Degree, including any courses specified as a major Pathway.

The Faculty will take into consideration a student's GPA before granting approval. Once approval is granted, the Faculty will advise students of the courses they should study when granting approval for them to follow the Pathway to the Bachelor of Engineering Science or the Bachelor of Engineering (Honours).

Recommended enrolment patterns

In this section:

Back to top

Agricultural Engineering major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Agricultural Engineering Pathway

It is recommended that students wishing to continue into the Bachelor of Engineering Science (Agricultural Engineering) or Bachelor of Engineering (Honours) (Agricultural Engineering) programs using a Pathway should have completed at least eight academic courses, including ENM1600 Engineering Mathematics in lieu of ENM1500 Introductory Engineering Mathematics. Pathway students should enrol in two Pathway courses as approved courses.


Major Study: Agricultural Engineering (Major Study Code: 16245)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1002 Introduction to Engineering and Built Environment Applications111,2
ENM1500 Introductory Engineering Mathematics#*111,2,3
ENG1003 Problem Solving in Engineering and the Built Environment111,2
CIV1500 Applied Mechanics111,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1100 Introduction to Engineering Design121,2
CIV1501 Engineering Statics122,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC1201 Engineering Materials121,2,3
SVY1500 Spatial Science for Engineers122

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M

Academic Courses Year 2

AGR2302 Agricultural Machinery211
ENV2103 Hydraulics I211Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
Approved course (Select from the approved course list)#211
Approved course (select from the approved course list)#211
AGR2301 Agricultural Science222
CIV2403 Geology and Geomechanics222Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
ENV3105 Hydrology222
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

CIV2901 Geology and Geomechanics Practice222,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
ENV2902 Hydraulics Practice221,2,3MPre-requisite: ENV2103 or ENV1101
AGR2902 Field Practice^3M
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or elective courses as approved by the Program Coordinator

     AGR3304 Soil Science#11
     AGR3305 Precision and Smart Technologies in Agriculture#22
     CLI2201 Climate Change and Variability2
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENM1600 Engineering Mathematics#1,21,2
     MEC2402 Stress Analysis11Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     ENV2201 Land Studies11
     AGR3303 Agricultural Materials and Post-Harvest Technologies#11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Agricultural Engineering Pathways sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodation costs.

Back to top

Agricultural Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Agricultural Engineering (Major Study Code: 16245)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENM1500 Introductory Engineering Mathematics#*1,21,2,3
ENG1003 Problem Solving in Engineering and the Built Environment11,2
ENG1100 Introduction to Engineering Design1,21,2

Year 2

CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
MEC1201 Engineering Materials1,21,2,3
CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
SVY1500 Spatial Science for Engineers22

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 3

AGR2302 Agricultural Machinery11
ENV2103 Hydraulics I11Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
AGR2301 Agricultural Science22
CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN

Year 3 Practice Courses

CIV2901 Geology and Geomechanics Practice22,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
ENV2902 Hydraulics Practice21,2,3MPre-requisite: ENV2103 or ENV1101
AGR2902 Field Practice^3M

Year 4

Approved course (select from the approved course list)#
Approved course (select from the approved course list)#
ENV3105 Hydrology22
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ENG2909 Work Experience - Associate1,2

Select approved courses from the following or elective courses as approved by the Program Coordinator

     AGR3304 Soil Science#11
     AGR3305 Precision and Smart Technologies in Agriculture#22
     CLI2201 Climate Change and Variability2
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENM1600 Engineering Mathematics#1,21,2
     MEC2402 Stress Analysis11Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     ENV2201 Land Studies11
     AGR3303 Agricultural Materials and Post-Harvest Technologies#11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Agricultural Engineering Pathways sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodation costs.

Back to top

Civil Engineering major full-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Civil Engineering Pathway

It is recommended that students wishing to continue into the Bachelor of Engineering Science (Civil Engineering) program should have completed at least eight courses, including ENM1600 Engineering Mathematics in lieu of ENM1500 Introductory Engineering Mathematics.

It is recommended that students wishing to continue directly into the Bachelor of Engineering (Honours) (Civil Engineering) program using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics in lieu of ENM1500 Introductory Engineering Mathematics . Pathway students should enrol in CIV3703 Transport Engineering instead of CIV2702 Municipal Services and must choose ENV4203 Public Health Engineering as their approved course. Students on the pathway will only be eligible to graduate out of the Associate Degree of Engineering (Civil Engineering) program if they have completed the courses according to the above instructions.


Major Study: Civil Engineering (Major Study Code: 15433)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1002 Introduction to Engineering and Built Environment Applications11,21,2
ENM1500 Introductory Engineering Mathematics#*111,2
CIV1500 Applied Mechanics111,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1003 Problem Solving in Engineering and the Built Environment111,2
ENG1100 Introduction to Engineering Design121,2
MEC1201 Engineering Materials121,2,3
CIV1501 Engineering Statics122,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
SVY1500 Spatial Science for Engineers122

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M

Academic Courses Year 2

Approved course (select from the approved course list)#211
ENV2103 Hydraulics I211Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
CIV2701 Road Design and Location211Pre-requisite: MAT1500 or ENG1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: GCST or GDST or GCEN
CIV2605 Construction Engineering211
CIV2403 Geology and Geomechanics222Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
CIV2502 Structural and Building Technology222
CIV2702 Municipal Services#222Pre-requisite: ENV2103 or ENV1101
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

CIV2901 Geology and Geomechanics Practice222,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
ENV2902 Hydraulics Practice221,2,3MPre-requisite: ENV2103 or ENV1101
CIV3906 Civil Materials Practice213MPre-requisite: MEC1201 and ENG1901 or Students must be enrolled in one of the following programs: ADCN or BCON or BCNH
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ENG2002 Technology, Sustainability and Society1,21,2,3
     CIV3603 Construction Methods2
     CIV3703 Transport Engineering#22
     CMG2001 Job Organisation22
     ENG4004 Engineering Project and Operations Management2,32,3
     ENV2201 Land Studies11
     GIS1402 Geographic Information Systems11,3
     ENM1600 Engineering Mathematics#1,21,2
     REN1201 Environmental Studies11
     URP3201 Sustainable Urban Design and Development22
     ENV3105 Hydrology22
     ENV4203 Public Health Engineering#22Pre-requisite: ENV1101 or ENV2103 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Civil Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in even numbered years only.

Back to top

Civil Engineering major part-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Civil Engineering (Major Study Code: 15433)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENM1500 Introductory Engineering Mathematics#*1,21,2
ENG1100 Introduction to Engineering Design1,21,2
MEC1201 Engineering Materials1,21,2,3

Year 2

CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1003 Problem Solving in Engineering and the Built Environment11,2
CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
SVY1500 Spatial Science for Engineers22

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 3

Approved course (select from the approved course list)#
ENV2103 Hydraulics I11Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
CIV2502 Structural and Building Technology22

Year 3 Practice Courses

CIV2901 Geology and Geomechanics Practice22,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
ENV2902 Hydraulics Practice21,2,3MPre-requisite: ENV2103 or ENV1101

Year 4

CIV2701 Road Design and Location11Pre-requisite: MAT1500 or ENG1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: GCST or GDST or GCEN
CIV2605 Construction Engineering11
CIV2702 Municipal Services#22Pre-requisite: ENV2103 or ENV1101
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

CIV3906 Civil Materials Practice13MPre-requisite: MEC1201 and ENG1901 or Students must be enrolled in one of the following programs: ADCN or BCON or BCNH
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ENG2002 Technology, Sustainability and Society1,21,2,3
     CIV3603 Construction Methods2
     CIV3703 Transport Engineering#22
     CMG2001 Job Organisation22
     ENG4004 Engineering Project and Operations Management2,32,3
     ENV2201 Land Studies11
     GIS1402 Geographic Information Systems11,3
     ENM1600 Engineering Mathematics#1,21,2
     REN1201 Environmental Studies11
     URP3201 Sustainable Urban Design and Development22
     ENV3105 Hydrology22
     ENV4203 Public Health Engineering#22Pre-requisite: ENV1101 or ENV2103 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Civil Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in even numbered years only.

Back to top

Computer Systems Engineering major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

On entering the Associate Degree of Engineering (Computer Systems Engineering) external students are required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers, diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required for ELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will be provided on commencement of these courses. Additionally, all students enrolled in course ELE2501 Electronic Workshop and Production will be required to purchase an electronic kit.

Computer Systems Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Computer Systems Engineering) or Bachelor of Engineering (Honours) (Computer Systems Engineering) programs using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics, in lieu of ENM1500 Introductory Engineering Mathematics. Pathway students should seek advice from the Faculty of Health, Engineering and Sciences before selecting their approved courses.


Major Study: Computer Systems Engineering (Major Study Code: 15434)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1003 Problem Solving in Engineering and the Built Environment111,2
ENM1500 Introductory Engineering Mathematics#*111,2
ELE1301 Computer Engineering111
ELE1502 Electronic Circuits111
ENG1002 Introduction to Engineering and Built Environment Applications121,2
CSC1401 Foundation Programming121,2,3
ENG1100 Introduction to Engineering Design121,2
ELE1801 Electrical Technology122,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M
ELE1911 Electrical and Electronic Practice A123M

Academic Courses Year 2

MAT1101 Discrete Mathematics for Computing211
ELE2303 Embedded Systems Design211
CSC2402 Object-Oriented Programming in C++211Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
Approved course (select from the approved course list)#211
ELE2501 Electronic Workshop and Production222Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation#222Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
Approved course (select from the approved course list)#222
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

ELE2912 Electrical and Electronic Practice B213MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ELE2913 Electrical and Electronic Practice C222MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     CSC2401 Algorithms and Data Structures22Pre-requisite: CSC2402 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
     CSC2404 Operating Systems22Pre-requisite: CSC1401 or CSC2408 or have experience using Linux systems or students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
     CSC2408 Software Development Tools1,21,2
     CSC3403 Comparative Programming Languages11Pre-requisite: CSC2402 or enrolled in CSC2402 at the same time as CSC3403 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
     ELE2503 Electronic Systems22Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
     ELE2504 Electronic Design and Analysis22Pre-requisite: ELE1502 or Students must be enrolled in one of the following Programs: MEPR or GDNS or MENS or GCNS or GCEN
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE3305 Computer Systems and Communications Protocols11
     ELE3307 Real Time Systems#22Pre-requisite: ELE1301 or Students must be enrolled in one of the following Programs: GCEN or METC or MENS or MEPR
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENG3003 Engineering Management1,31,3

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Computer Systems Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in odd numbered years only.

Back to top

Computer Systems Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Computer Systems Engineering (Major Study Code: 15434)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1003 Problem Solving in Engineering and the Built Environment11,2
ENM1500 Introductory Engineering Mathematics#*1,21,2,3
ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
CSC1401 Foundation Programming1,21,2,3

Year 1 Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 2

ELE1301 Computer Engineering11
ELE1502 Electronic Circuits11
ENG1100 Introduction to Engineering Design1,21,2
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 2 Practice Courses

ELE1911 Electrical and Electronic Practice A23M

Year 3

MAT1101 Discrete Mathematics for Computing11
ELE2303 Embedded Systems Design11
ELE2501 Electronic Workshop and Production22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation#22Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 3 Practice Courses

ELE2912 Electrical and Electronic Practice B13MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS

Year 4

CSC2402 Object-Oriented Programming in C++11Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
Approved course (select from the approved course list)#
Approved course (select from the approved course list)#
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ELE2913 Electrical and Electronic Practice C22MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     CSC2401 Algorithms and Data Structures22Pre-requisite: CSC2402 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
     CSC2408 Software Development Tools1,21,2
     CSC3403 Comparative Programming Languages11Pre-requisite: CSC2402 or enrolled in CSC2402 at the same time as CSC3403 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT
     ELE2503 Electronic Systems22Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
     ELE2504 Electronic Design and Analysis22Pre-requisite: ELE1502 or Students must be enrolled in one of the following Programs: MEPR or GDNS or MENS or GCNS or GCEN
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE3305 Computer Systems and Communications Protocols11
     ELE3307 Real Time Systems#22Pre-requisite: ELE1301 or Students must be enrolled in one of the following Programs: GCEN or METC or MENS or MEPR
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENG3003 Engineering Management1,31,3

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Computer Systems Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in odd numbered years only.

Back to top

Electrical and Electronic Engineering major full-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

On entering the Associate Degree of Engineering (Electrical and Electronic Engineering) external students are required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers, diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required for ELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will be provided on commencement of these courses. Additionally, all students enrolled in course ELE2501 Electronic Workshop and Production will be required to purchase an electronic kit. For external students in the course ELE2702 Electrical Measurement and Analysis , access to a multimeter and hook-up wire is required, together with the purchase of some electronic components.

Electrical and Electronic Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Electrical & Electronic Engineering) or Bachelor of Engineering (Honours) (Electrical & Electronic Engineering) programs using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics, in lieu of ENM1500 Introductory Engineering Mathematics . Pathway students should seek advice from the Faculty of Health, Engineering and Sciences before selecting their approved courses.


Major Study: Electrical and Electronic Engineering (Major Study Code: 15435)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1003 Problem Solving in Engineering and the Built Environment 11,21,2
ENM1500 Introductory Engineering Mathematics #*111,2,3
ELE1301 Computer Engineering 111
ELE1502 Electronic Circuits 111
ENG1002 Introduction to Engineering and Built Environment Applications 121,2
MEC1201 Engineering Materials 11,21,2,3
Approved course (select from the approved course list)#122
ELE1801 Electrical Technology 122,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses Year 1

ENG1901 Engineering Practice 1 112,3M
ELE1911 Electrical and Electronic Practice A 123M

Academic Courses Year 2

ENG1100 Introduction to Engineering Design 211,2
ELE2702 Electrical Measurement and Analysis 211Pre-requisite: (ENG1500 or MAT1500 or ENM1500 or ENM1600) and ELE1801 or Students must be enrolled in the following Program: GCEN
ELE2601 Telecommunications Principles 211Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
Approved course (Select from the approved course list)#211
ELE2501 Electronic Workshop and Production 222Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation #222Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
ELE2503 Electronic Systems #222Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
ENG2111 Engineering Associate Degree Design Project 222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

ELE2912 Electrical and Electronic Practice B 213MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ELE2913 Electrical and Electronic Practice C 222MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate 1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design #11
     ELE2704 Electricity Supply Systems 22Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: MEPR or GCEN or METC
     ELE3506 Electronic Measurement #22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3803 Electrical Plant #11Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     ELE3805 Power Electronics Principles and Applications 22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     CSC1401 Foundation Programming 1,21,2,3
     CSC2402 Object-Oriented Programming in C++ 11,2,3Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
     MEC3204 Production Engineering 22
     ENG2002 Technology, Sustainability and Society 1,21,2,3
     ENG3003 Engineering Management 1,31,3
     CHE1110 Chemistry 1 ^11HR

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Electrical and Electronic Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in odd numbered years only.
^CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.

Back to top

Electrical and Electronic Engineering major part-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Electrical and Electronic Engineering (Major Study Code: 15435)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1003 Problem Solving in Engineering and the Built Environment11,2
ENM1500 Introductory Engineering Mathematics#*1,21,2,3
ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
MEC1201 Engineering Materials1,21,2,3

Year 2

ELE1301 Computer Engineering11
ELE1502 Electronic Circuits11
Approved course (select from the approved course list)#
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M
ELE1911 Electrical and Electronic Practice A23M

Year 3

ENG1100 Introduction to Engineering Design1,21,2
Approved course (Select from the approved course list)#
ELE2501 Electronic Workshop and Production22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation#22Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 3 Practice Courses

ELE2912 Electrical and Electronic Practice B13MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS

Year 4

ELE2702 Electrical Measurement and Analysis11Pre-requisite: (ENG1500 or MAT1500 or ENM1500 or ENM1600) and ELE1801 or Students must be enrolled in the following Program: GCEN
ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
ELE2503 Electronic Systems#22Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ELE2913 Electrical and Electronic Practice C22MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design#11
     ELE2704 Electricity Supply Systems22Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: MEPR or GCEN or METC
     ELE3506 Electronic Measurement#22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3803 Electrical Plant#11Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     ELE3805 Power Electronics Principles and Applications22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     CSC1401 Foundation Programming1,21,2,3
     CSC2402 Object-Oriented Programming in C++11Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
     MEC3204 Production Engineering22
     ENG2002 Technology, Sustainability and Society1,21,2,3
     ENG3003 Engineering Management1,31,3
     CHE1110 Chemistry 1^11HR

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Electrical and Electronic Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
The semester 3 offering of this course is offered in odd numbered years only.
^CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.

Back to top

Environmental Engineering major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Environmental Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Environmental Engineering) or Bachelor of Engineering (Honours) (Environmental Engineering) programs using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics in lieu of ENM1500 Introductory Engineering Mathematics. Pathway students should choose any Bachelor of Engineering Science (Environmental Engineering) Core course and ENG2002 Technology, Sustainability and Society as their approved courses.


Major Study: Environmental Engineering (Major Study Code: 15436)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1002 Introduction to Engineering and Built Environment Applications111,2
ENM1500 Introductory Engineering Mathematics#*111,2,3
ENG1003 Problem Solving in Engineering and the Built Environment111,2
CIV1500 Applied Mechanics111,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1100 Introduction to Engineering Design121,2
BIO1100 Biology Concepts2
MEC1201 Engineering Materials121,2,3
SVY1500 Spatial Science for Engineers122

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M

Academic Courses Year 2

ENV2105 Applied Chemistry and Microbiology211
Approved course (Select from the approved course list)#211
ENV2103 Hydraulics I211Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
ENV2201 Land Studies211
CIV2403 Geology and Geomechanics222Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
Approved course (Select from the approved course list)#222
ENV3105 Hydrology222
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

CIV2901 Geology and Geomechanics Practice222,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
ENV2902 Hydraulics Practice221,2,3MPre-requisite: ENV2103 or ENV1101
AGR2902 Field Practice^3M
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     CIV2702 Municipal Services22Pre-requisite: ENV2103 or ENV1101
     AGR2301 Agricultural Science22
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENM1600 Engineering Mathematics#1,21,2
     REN1201 Environmental Studies11
     URP3201 Sustainable Urban Design and Development22
     SVY3202 Photogrammetry and Remote Sensing11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Environmental Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodation costs.

Back to top

Environmental Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Environmental Engineering (Major Study Code: 15436)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENM1500 Introductory Engineering Mathematics#*1,21,2,3
ENG1100 Introduction to Engineering Design1,21,2
BIO1100 Biology Concepts2

Year 2

ENG1003 Problem Solving in Engineering and the Built Environment11,2
CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
MEC1201 Engineering Materials1,21,2,3
SVY1500 Spatial Science for Engineers22

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 3

ENV2105 Applied Chemistry and Microbiology11
Approved course (Select from the approved course list)#
CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
Approved course (Select from the approved course list)#

Year 3 Practice Courses

CIV2901 Geology and Geomechanics Practice22,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
AGR2902 Field Practice^3M

Year 4

ENV2103 Hydraulics I11Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
ENV2201 Land Studies11
ENV3105 Hydrology22
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ENV2902 Hydraulics Practice21,2,3MPre-requisite: ENV2103 or ENV1101
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     CIV2702 Municipal Services22Pre-requisite: ENV2103 or ENV1101
     AGR2301 Agricultural Science22
     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENM1600 Engineering Mathematics#1,21,2
     REN1201 Environmental Studies11
     URP3201 Sustainable Urban Design and Development22
     SVY3202 Photogrammetry and Remote Sensing11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Environmental Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^The residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodation costs.

Back to top

Instrumentation Control and Automation Engineering major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Instrumentation Control and Automation Engineering (Major Study Code: )
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENM1500 Introductory Engineering Mathematics*1,21,2,3
ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENG1003 Problem Solving in Engineering and the Built Environment11,2
CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
MEC1201 Engineering Materials1,21,2,3
ENG1100 Introduction to Engineering Design1,21,2
MEC1501 Introduction to Industrial Processes2Pre-requisite: CIV1500 or CIV1501
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses Year 1

ENG1901 Engineering Practice 11,22,3M

Academic Courses Year 2

ELE1301 Computer Engineering11
ELE1502 Electronic Circuits11
Approved course (Select from the approved course list)11
Approved course (Select from the approved course list)11
ELE2101 Control and Instrumentation22Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC2106 Introduction to Thermofluids22Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN or MENS
MEC2501 Process Control Systems2Pre-requisite: ELE2103 or (MEC1501 and ELE2101 as Co-requisite or Pre-requisite)
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

MEC2901 Mechanical Practice 113M
ELE1911 Electrical and Electronic Practice A23M
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design11
     ELE2501 Electronic Workshop and Production22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
     ELE2504 Electronic Design and Analysis22Pre-requisite: ELE1502 or Students must be enrolled in one of the following Programs: MEPR or GDNS or MENS or GCNS or GCEN
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE3107 Signal Processing22
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3805 Power Electronics Principles and Applications22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC2202 Manufacturing Processes11Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: MEPR or GCEN
     MEC2301 Design of Machine Elements22Pre-requisite: MEC2402 or Students must be enrolled in one of the following Programs: MEPR or GCEN
     MEC2402 Stress Analysis11Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC2405 Machine Dynamics11Pre-requisite: CIV1501 or Students must be enrolled in the following Program: GCEN
     MEC3204 Production Engineering22
     CSC1401 Foundation Programming11,2,3
     CSC2402 Object-Oriented Programming in C++11Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
     CHE1110 Chemistry 1^11HR
     CHE2120 Chemistry 2^22HRPre-requisite: CHE1110
     ENM1600 Engineering Mathematics11,2
     CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN

Footnotes
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^Chemistry courses have a highly recommended residential school component in external mode.

Back to top

Instrumentation Control and Automation Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Instrumentation Control and Automation Engineering (Major Study Code: )
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENM1500 Introductory Engineering Mathematics*1,21,2,3
ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENG1003 Problem Solving in Engineering and the Built Environment11,2
MEC1201 Engineering Materials1,21,2,3

Academic Courses Year 2

CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1100 Introduction to Engineering Design1,21,2
MEC1501 Introduction to Industrial Processes2Pre-requisite: CIV1500 or CIV1501
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses Year 2

ENG1901 Engineering Practice 11,22,3M

Academic Courses Year 3

ELE1301 Computer Engineering11
ELE1502 Electronic Circuits11
ELE2101 Control and Instrumentation22Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC2106 Introduction to Thermofluids22Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN or MENS

Practice Courses Year 3

MEC2901 Mechanical Practice 113M
ELE1911 Electrical and Electronic Practice A23M

Academic Courses Year 4

Approved course (Select from the approved course list)11
Approved course (Select from the approved course list)11
MEC2501 Process Control Systems2Pre-requisite: ELE2103 or (MEC1501 and ELE2101 as Co-requisite or Pre-requisite)
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 4

ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design11
     ELE2501 Electronic Workshop and Production22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
     ELE2504 Electronic Design and Analysis22Pre-requisite: ELE1502 or Students must be enrolled in one of the following Programs: MEPR or GDNS or MENS or GCNS or GCEN
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE3107 Signal Processing22
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3805 Power Electronics Principles and Applications22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC2202 Manufacturing Processes11Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: MEPR or GCEN
     MEC2301 Design of Machine Elements22Pre-requisite: MEC2402 or Students must be enrolled in one of the following Programs: MEPR or GCEN
     MEC2402 Stress Analysis11Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC2405 Machine Dynamics11Pre-requisite: CIV1501 or Students must be enrolled in the following Program: GCEN
     MEC3204 Production Engineering22
     CSC1401 Foundation Programming11,2,3
     CSC2402 Object-Oriented Programming in C++11Pre-requisite: CSC1401 or Students must be enrolled in one of the following Programs: GDTI or GCSC or GCEN or METC or MCOT or MCTE or MCOP or MPIT or MCTN
     CHE1110 Chemistry 1^11HR
     CHE2120 Chemistry 2^22HRPre-requisite: CHE1110
     ENM1600 Engineering Mathematics11,2
     CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN

Footnotes
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^Chemistry courses have a highly recommended residential school component in external mode.

Back to top

Mechanical Engineering major full-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Mechanical Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Mechanical Engineering) or Bachelor of Engineering (Honours) (Mechanical Engineering) programs using a Pathway should have completed at least eight courses. Pathway students should enrol in MEC2304 Solid Modelling as the approved course.


Major Study: Mechanical Engineering (Major Study Code: 15437)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

Academic Courses

ENG1002 Introduction to Engineering and Built Environment Applications111,2
ENG1003 Problem Solving in Engineering and the Built Environment111,2
ENM1500 Introductory Engineering Mathematics*111,2
CIV1500 Applied Mechanics111,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600

Practice Courses

ENG1901 Engineering Practice 1112,3M
MEC2901 Mechanical Practice 1113M

Academic Courses

ENG1100 Introduction to Engineering Design121,2
MEC1201 Engineering Materials121,2,3
CIV1501 Engineering Statics122,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
Approved course (select from the approved course list)#122

Year 2

Academic Courses

ENM1600 Engineering Mathematics211,2
MEC2202 Manufacturing Processes211Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC2402 Stress Analysis211Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
MEC2405 Machine Dynamics211Pre-requisite: CIV1501 or Students must be enrolled in the following Program: GCEN

Practice Courses

MEC2902 Mechanical Practice 2211M
ENG2909 Work Experience - Associate1,2

Academic Courses

MEC2106 Introduction to Thermofluids222Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN or MENS
ELE1801 Electrical Technology222,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC2301 Design of Machine Elements222Pre-requisite: MEC2402 or Students must be enrolled in one of the following Programs: MEPR or GCEN
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses

MEC3903 Mechanical Practice 3<223M

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     MEC2304 Solid Modelling#22
     MEC3204 Production Engineering22
     MEC3107 Thermofluids^11
     CIV2503 Structural Design I22Pre-requisite: (ENG1100 and MEC2402) or (ENG1100 and CIV1501 for students enrolled in one of the following Programs: BETC Infrastructure Management major or BENS Infrastructure Management major) or Students must be enrolled in the following Program: GCEN
     CIV2502 Structural and Building Technology22
     AGR2302 Agricultural Machinery11

Footnotes
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics and consequently the study of ENM1600 Engineering Mathematics with MEC2101 Thermodynamics to align with the Recommended Enrolment Pattern for the BENS Bachelor of Engineering Science (Mechanical) program. Please contact the Faculty of Health, Engineering and Sciences for further information.
#This is a Pathway course. Please refer to Engineering Pathways and Mechanical Engineering Pathways sections earlier in this program entry.
<MEC3903 Mechanical Practice 3 will not be offered on-campus at Springfield in 2019.
^MEC3107 Thermofluids will be offered for the first time in 2020.

Back to top

Mechanical Engineering major part-time recommended enrolment pattern (Toowoomba and Springfield campus)

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Mechanical Engineering (Major Study Code: 15437)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

Academic Courses

ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENG1003 Problem Solving in Engineering and the Built Environment11,2
ENG1100 Introduction to Engineering Design1,21,2
MEC1201 Engineering Materials1,21,2,3

Year 2

Academic Courses

ENM1500 Introductory Engineering Mathematics*1,21,2,3
CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
Approved course (select from the approved course list)#

Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 3

Academic Courses

ENM1600 Engineering Mathematics1,21,2
MEC2202 Manufacturing Processes11Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: MEPR or GCEN
MEC2106 Introduction to Thermofluids22Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN or MENS
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses

MEC2901 Mechanical Practice 113M

Year 4

Academic Courses

MEC2402 Stress Analysis11Pre-requisite: CIV1501 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
MEC2405 Machine Dynamics11Pre-requisite: CIV1501 or Students must be enrolled in the following Program: GCEN

Practice Courses

ENG2909 Work Experience - Associate1,2

Academic Courses

MEC2301 Design of Machine Elements22Pre-requisite: MEC2402 or Students must be enrolled in one of the following Programs: MEPR or GCEN
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses

MEC2902 Mechanical Practice 211M
MEC3903 Mechanical Practice 3<23M

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     MEC2304 Solid Modelling#22
     MEC3204 Production Engineering22
     MEC3107 Thermofluids^11
     CIV2503 Structural Design I22Pre-requisite: (ENG1100 and MEC2402) or (ENG1100 and CIV1501 for students enrolled in one of the following Programs: BETC Infrastructure Management major or BENS Infrastructure Management major) or Students must be enrolled in the following Program: GCEN
     CIV2502 Structural and Building Technology22
     AGR2302 Agricultural Machinery11

Footnotes
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics and consequently the study of ENM1600 Engineering Mathematics with MEC2101 Thermodynamics to align with the Recommended Enrolment Pattern for the BENS Bachelor of Engineering Science (Mechanical) program. Please contact the Faculty of Health, Engineering and Sciences for further information.
#This is a Pathway course. Please refer to Engineering Pathways and Mechanical Engineering Pathways sections earlier in this program entry.
<MEC3903 Mechanical Practice 3 will not be offered on-campus at Springfield in 2019.
^MEC3107 Thermofluids will be offered for the first time in 2020.

Back to top

Mining Engineering major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Mining Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Civil Engineering) or Bachelor of Engineering (Honours) (Civil Engineering) programs using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics in lieu of ENM1500 Introductory Engineering Mathematics. Pathway students should enrol in two Pathway courses as approved courses.


Major Study: Mining Engineering (Major study code: 17046)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENM1500 Introductory Engineering Mathematics#*111,2
CIV1500 Applied Mechanics111,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
ENG1002 Introduction to Engineering and Built Environment Applications111,2
ENG1003 Problem Solving in Engineering and the Built Environment111,2
SVY1500 Spatial Science for Engineers122
MEC1201 Engineering Materials121,2,3
CIV1501 Engineering Statics122,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
Approved course (Select from the approved course list)#122,3

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M

Academic Courses Year 2

CIV2605 Construction Engineering211
MIN2001 Mining Technology and Mineral Processing>211
ENG1100 Introduction to Engineering Design211
Approved course (select from the approved course list)#211
CIV2403 Geology and Geomechanics222Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
MIN2003 Mine Operations and Management 222Pre-requisite or Co-requisite: SVY1500
MIN2002 Mine Planning and Design 222
ENG2111 Engineering Associate Degree Design Project 222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

CIV2901 Geology and Geomechanics Practice 222,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
MIN2901 Mining Practice<233MPre-requisite or Co-requisite: MIN2001
ENG2909 Work Experience - Associate 1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

MINAD Approved Courses (taken through Central Queensland University (CQU) via cross-institutional enrolment)

     ENAR12004 Mine Management and Safety1
     ENAR12006 Rock Engineering1
     ENAR11001 Resource Geology2

USQ Approved Courses

     ENG2002 Technology, Sustainability and Society#21,2,3
     ENV2103 Hydraulics I#11Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
     ENV2201 Land Studies11
     ENV3105 Hydrology#22
     GIS1402 Geographic Information Systems11,3
     MEC1501 Introduction to Industrial Processes22Pre-requisite: CIV1500 or CIV1501
     MGT2001 Risk Mitigation, Work Health and Safety11
     SVY1110 Introduction to Global Positioning System22
     SVY3202 Photogrammetry and Remote Sensing11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Mining Engineering sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
>Online mode only in 2019 (not available on-campus)
<offered in Semester 3 in odd years only e.g. 2019, 2021 etc

Back to top

Mining Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Mining Engineering (Major study code: 17046)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENM1500 Introductory Engineering Mathematics#*1,21,2,3
CIV1500 Applied Mechanics11,3Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600
SVY1500 Spatial Science for Engineers22
MEC1201 Engineering Materials1,21,2,3

Year 2

ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
ENG1003 Problem Solving in Engineering and the Built Environment11,2
CIV1501 Engineering Statics22,3Pre-requisite: ENG1500 or MAT1500 or ENM1600 or (ENM1500 and CIV1500) or Students must be enrolled in one of the following Programs: MEPR or GCEN
Approved course (Select from the approved course list)#

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M

Year 3

CIV2605 Construction Engineering11
MIN2001 Mining Technology and Mineral Processing>11
CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
MIN2003 Mine Operations and Management22Pre-requisite or Co-requisite: SVY1500

Year 3 Practice Courses

CIV2901 Geology and Geomechanics Practice22,3MPre-requisite or Co-requisite: ENG1901 and CIV2403
MIN2901 Mining Practice<3MPre-requisite or Co-requisite: MIN2001

Year 4

ENG1100 Introduction to Engineering Design1,21,2
Approved course (select from the approved course list)#
MIN2002 Mine Planning and Design22
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

MINAD Approved Courses (taken through Central Queensland University (CQU) via cross-institutional enrolment)

     ENAR12004 Mine Management and Safety1
     ENAR12006 Rock Engineering1
     ENAR11001 Resource Geology2

USQ Approved Courses

     ENG2002 Technology, Sustainability and Society#1,21,2,3
     ENV2103 Hydraulics I#11Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN
     ENV2201 Land Studies11
     ENV3105 Hydrology#22
     GIS1402 Geographic Information Systems11,3
     MEC1501 Introduction to Industrial Processes2Pre-requisite: CIV1500 or CIV1501
     MGT2001 Risk Mitigation, Work Health and Safety11
     SVY1110 Introduction to Global Positioning System22
     SVY3202 Photogrammetry and Remote Sensing11

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Mining Engineering sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
>Online mode only in 2019 (not available on-campus)
<offered in Semester 3 in odd years only e.g. 2019, 2021 etc

Back to top

Power Engineering Major full-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

On entering the Associate Degree of Engineering (Power Engineering) external students are required to purchase a kit of tools comprising an electronic soldering iron, wire strippers, long nose pliers, diagonal cutter, safety glasses and an electronic prototyping 'breadboard'. These will first be required for ELE2501 Electronic Workshop and Production and ELE1502 Electronic Circuits, and further details will be provided on commencement of these courses.

Additionally, all students enrolled in course ELE2501 Electronic Workshop and Production will be required to purchase an electronic kit. For external students in the course ELE2702 Electrical Measurement and Analysis, access to a multimeter and hook-up wire is required, together with the purchase of some electronic components.

Power Engineering Pathway

It is recommended that students wishing to continue into either the Bachelor of Engineering Science (Power Engineering) or Bachelor of Engineering (Honours) (Power Engineering) programs using a Pathway should have completed at least eight courses, including ENM1600 Engineering Mathematics, in lieu of ENM1500 Introductory Engineering Mathematics. Pathway students should seek advice from the Faculty of Health, Engineering and Sciences before selecting their approved courses.


Major Study: Power Engineering (Major Study Code: 15936)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Academic Courses Year 1

ENG1003 Problem Solving in Engineering and the Built Environment111,2
ENM1500 Introductory Engineering Mathematics#*111,2
ELE1301 Computer Engineering111
ELE1502 Electronic Circuits111
ENG1002 Introduction to Engineering and Built Environment Applications121,2
MEC1201 Engineering Materials121,2,3
Approved Course (select from the approved course list)#122
ELE1801 Electrical Technology122,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Practice Courses Year 1

ENG1901 Engineering Practice 1112,3M
ELE1911 Electrical and Electronic Practice A123M

Academic Courses Year 2

ENG1100 Introduction to Engineering Design211,2
ELE2702 Electrical Measurement and Analysis211Pre-requisite: (ENG1500 or MAT1500 or ENM1500 or ENM1600) and ELE1801 or Students must be enrolled in the following Program: GCEN
Approved Course (Select from the approved course list)#211
Approved Course (select from the approved course list)#211
ELE2501 Electronic Workshop and Production222Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation#222Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN
ELE2503 Electronic Systems#222Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
ENG2111 Engineering Associate Degree Design Project222Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Practice Courses Year 2

ELE2912 Electrical and Electronic Practice B213MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ELE2913 Electrical and Electronic Practice C222MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design#11
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE2704 Electricity Supply Systems#22Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: MEPR or GCEN or METC
     ELE3107 Signal Processing22
     ELE3307 Real Time Systems#22Pre-requisite: ELE1301 or Students must be enrolled in one of the following Programs: GCEN or METC or MENS or MEPR
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3803 Electrical Plant#11Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC3203 Materials Technology11Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: GCEN or METC or GCNS or GDNS or MEPR or MENS
     MEC3204 Production Engineering22
     CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
     CIV2605 Construction Engineering11
     GIS1401 Geographic Data Presentation22
     GIS1402 Geographic Information Systems11,3
     SVY1110 Introduction to Global Positioning System22
     CHE1110 Chemistry 1^11HR

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Power Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.

Back to top

Power Engineering major part-time recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.


Major Study: Power Engineering (Major Study Code: 15936)
CourseYear of program and semester
in which course is normally studied
Residential schoolEnrolment requirements
On-campus
(ONC)
External
(EXT)
Online
(ONL)
YearSemYearSemYearSem

Year 1

ENG1003 Problem Solving in Engineering and the Built Environment11,2
ENM1500 Introductory Engineering Mathematics#*1,21,2,3
ENG1002 Introduction to Engineering and Built Environment Applications1,21,2
MEC1201 Engineering Materials1,21,2,3

Year 2

ELE1301 Computer Engineering11
ELE1502 Electronic Circuits11
Approved Course (select from the approved course list)#
ELE1801 Electrical Technology22,3Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 2 Practice Courses

ENG1901 Engineering Practice 11,22,3M
ELE1911 Electrical and Electronic Practice A23M

Year 3

ENG1100 Introduction to Engineering Design1,21,2
ELE2702 Electrical Measurement and Analysis11Pre-requisite: (ENG1500 or MAT1500 or ENM1500 or ENM1600) and ELE1801 or Students must be enrolled in the following Program: GCEN
ELE2501 Electronic Workshop and Production22Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in the following Program: GCEN
ELE2101 Control and Instrumentation#22Pre-requisite: ENG1500 or MAT1500 or ENM1500 or ENM1600 or Students must be enrolled in one of the following Programs: MEPR or GCEN

Year 3 Practice Courses

ELE2912 Electrical and Electronic Practice B13MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS

Year 4

Approved Course (Select from the approved course list)#
Approved Course (select from the approved course list)#
ELE2503 Electronic Systems#22Pre-requisite: ELE1502 or Students must be enrolled in the following Program: GCEN
ENG2111 Engineering Associate Degree Design Project22Pre-requisite: ENG1100 and (ENG1101 or ENG1003)

Year 4 Practice Courses

ELE2913 Electrical and Electronic Practice C22MPre-requisite: (ELE1301 and ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GDNS or MENS
ENG2909 Work Experience - Associate1,2

Select approved courses from the following or other elective courses as approved by the Program Coordinator

     ELE2303 Embedded Systems Design#11
     ELE2601 Telecommunications Principles11Pre-requisite: (ELE1502 and ELE1801) or Students must be enrolled in one of the following Programs: GCEN or METC
     ELE2704 Electricity Supply Systems#22Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: MEPR or GCEN or METC
     ELE3107 Signal Processing22
     ELE3307 Real Time Systems#22Pre-requisite: ELE1301 or Students must be enrolled in one of the following Programs: GCEN or METC or MENS or MEPR
     ELE3506 Electronic Measurement22Pre-requisite: (ELE1502 and (ELE2101 or ELE2103) and (ELE2503 or ELE2504)) or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or MENS
     ELE3803 Electrical Plant#11Pre-requisite: ELE1801 or Students must be enrolled in one of the following Programs: GCEN or METC or MEPR or GCNS or GDNS or MENS
     MEC3203 Materials Technology11Pre-requisite: MEC1201 or Students must be enrolled in one of the following Programs: GCEN or METC or GCNS or GDNS or MEPR or MENS
     MEC3204 Production Engineering22
     CIV2403 Geology and Geomechanics22Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN
     CIV2605 Construction Engineering11
     GIS1401 Geographic Data Presentation22
     GIS1402 Geographic Information Systems11,3
     SVY1110 Introduction to Global Positioning System22
     CHE1110 Chemistry 1^11HR

Footnotes
#This is a Pathway course. Please refer to Engineering Pathways and Power Engineering Pathway sections earlier in this program entry.
*Students who achieve a high level in Year 12 Mathematics, or an equivalent mathematics program, may be eligible to replace the study of ENM1500 Introductory Engineering Mathematics with ENM1600 Engineering Mathematics. Please contact the Faculty of Health, Engineering and Sciences for further information.
^CHE1110 Chemistry 1 has a highly recommended residential school component in external mode.